
1 / 3 · Click to enlarge
AI Summary
A compact 6A microswitch limit switch rated for 125V/250V AC and 30V DC with a T85 temperature rating. Its small body fits tight enclosures for limit detection and control tasks.
Key Highlights
- Compact space-saving body for tight enclosures and small assemblies
- 6A contact rating at 125V or 250V AC and 30V DC
- T85 temperature rating for warm operating environments
- Mechanical switching action for repeatable limit detection
- Simple terminal layout for quick circuit integration
- Suited to appliances, robotics, automation and DIY projects
Ideal For
- Makers building robotics and automation projects
- Appliance repair technicians replacing limit switches
- DIY electronics hobbyists adding position sensing
- Industrial control integrators needing compact switches
- Students learning mechanical switching fundamentals
Buying Tip
Confirm your circuit's current and voltage stay within the 6A, 125V/250V AC and 30V DC ratings before ordering, and check that the compact body fits your mounting space.
Elecvora expert review
Our verdict
A practical, compact limit switch for builders who need a straightforward mechanical switching element with clear 6A and dual-voltage ratings. It is a sensible choice for limit detection and control tasks where space is limited.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact body suits tight enclosures
- Clear 6A, 125V/250V AC and 30V DC ratings
- Mechanical action gives repeatable response
- Simple to integrate into circuits
- T85 temperature rating
Cons
- No mounting hardware or wiring included
- Not intended for loads beyond its stated ratings
- Mechanical contacts wear over many cycles
Best for
Makers and technicians needing a small limit switch for position detection
Not ideal for
High-power or high-current switching applications beyond the stated ratings
Specifications
| Shipping Weight | 0.01 kg |
|---|---|
| Shipping Dimensions | 4 × 3 × 2 cm |
What's in the box
- 1 x Microswitch KW10-Z1P Limit Switch
Frequently Asked Questions
What is the KW10-Z1P used for?
What are the electrical ratings?
Does it need its own power supply?
What temperature can it handle?
What is included in the package?
How should I maintain it?
Overview
The KW10-Z1P is a microswitch limit switch designed for precise position detection and control in electronic and automation systems. It uses a mechanical switching action to trigger a circuit when an actuator reaches a set point, making it useful for end-of-travel sensing, safety interlocks and simple control tasks. The compact form factor allows it to sit inside small enclosures where a larger switch would not fit.
Key Features
- Compact, space-saving body for tight installations
- Reliable mechanical switching action
- 6A rated current for everyday switching loads
- Dual AC voltage rating of 125V and 250V, plus 30V DC
- T85 temperature rating
- Straightforward integration into electronic circuits
Specifications Explained
Current and voltage ratings
The 6A rated current with 125V/250V AC and 30V DC ratings tells you the contact load the switch is intended to handle. Match these figures to your circuit so the switch operates within its stated limits rather than being pushed beyond them.
Temperature rating
T85 indicates the switch is rated for environments up to 85 degrees Celsius. Keep this in mind when placing it near heat-generating components such as motors or power supplies.
Size and weight
At roughly 7 g and with a compact footprint, the switch adds little bulk to a build. Its shipping dimensions of 4 x 3 x 2 cm reflect the small packaged size, which helps when planning enclosure space.
Compatibility and Requirements
The KW10-Z1P is a passive mechanical component, so it needs no power supply of its own. It works as part of the circuit you wire it into, and correct operation depends on staying within the 6A, 125V/250V AC and 30V DC ratings. Plan your wiring and actuator placement so the switch is triggered cleanly at the intended position.
Typical Uses
- End-of-travel and position limit detection
- Appliance control and door or lid sensing
- Robotics and DIY electronics projects
- Industrial control panels and automation builds
- Safety interlocks and simple trigger circuits
What's in the Box
One KW10-Z1P microswitch limit switch is included. No mounting hardware, wiring or connectors are supplied, so source those separately for your installation.













