
1 / 7 · Click to enlarge
At a glance
This rf amplifier is a good fit for makers, students and electronics hobbyists.
Key Highlights
- Small and easy to carry or mount
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Overview
The Mini Pocket Radio ESP32-S3 SI4732 Receive Radio 1.9inch IPS Screen LSB/USB/AM/FM Radio with Loop Antenna 0.5-108mhz HF SW MW VHF is listed in our rf amplifier range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Specifications:
Master: ESP-32-S3
Receiving frequency band: HF SW MW VHF
Screen: 1.9 inch, 170*320
Charging interface: TYPE-C (fast charging is not available)
Audio interface: 3.5mm three-band stereo
Battery capacity: 800ma
Body size: 7.3*3.2*1.2
Body weight: 54g.
Frequency:
1. FM: 64MHz-108MHz
2. AM: 520kHz-1710kHz
3. SW: 2.3MHz-26.1MHz
4. LW: 153kHz-279kHz
Mode: FM/AM/LSB/USB (note that aviation band is not supported)
Color: Black,Blue,White,Red,Orange (optional)
Features:
1. Using ESP32-S3 master control, 1.9 inch IPS high-definition color screen
2. Using SI4732 DSP chip, supporting full-band broadcasting, LSB USB AM FM mode.
3. Built-in 800 mAh battery, battery life is about 10 hours or more.
4. Equipped with 70cm portable telescopic antenna for reception.
5. Shell petg 3D printing.
Package Include:
1 x MINI SI4732 Radio
1 x Loop Antenna
1 x USB Cable
About the standard loop antenna:
It can effectively improve the reception effect of medium wave and short wave bands, especially in weak signal environment. Although the FM reception effect may not be as good as the dedicated FM antenna, it can still support FM reception. The portability and durability of the antenna make it suitable for outdoor use and long-term use. And it supports 360-degree rotation, which is more conducive to searching for signals.
Operation Guide:
1. Double-click the knob on the main interface to enter the menu
2. On the menu page, rotate the knob to switch menus and modes, and click again to "confirm"
3. Rotate the knob on the main interface to switch frequency bands, and click again to "confirm"
4. Since the body is very small and cannot prevent headphone amplifiers, the volume output is low after inserting headphones, which is normal. You can connect external speakers to achieve a higher volume.







Explore more
Cheaper Alternatives

Donut Broadband Antenna 10kHz-180MHz SMA Male Omnidirectional Shortwave Mediumwave Antenna for Quansheng UV-K5/K6 Walkie Talkies SDR Receiver Malahit-DSP2 Pocket Radio

ADS-B 1090MHZ Antenna Gain 2.0dBi Frequency Range 1060-1120 MHz
DC-4.0GHz Radio Frequency Fixed Attenuator RF Amplifier Module
Upgrade Options
High Power RF Amplifier 433MHz 25W Wide Frequency Range 390-470MHz Intelligent Temperature Control High Gain 30dB SMA-K Connector
UNI-730A Automatic Paddle Key Keyer CW Morse Code for HAM Radio with Silver Plating and 3.5mm Jack

HF20A Short Wave Full-Length Single-Line Traveling Wave Antenna 1000W Max Power 0-800KM Range SWR<2.0 High Radiation Efficiency Portable








