
1 / 3 · Click to enlarge
AI Summary
A 2S1P Molicel 18650-M35A Li-ion pack delivering 7.4V nominal and 3500mAh through a 3 Pin JST XH port. Compact and stable, it suits low-to-moderate current builds that manage charging and protection externally.
Key Highlights
- 7.4V nominal 2S1P configuration with 3500mAh capacity
- 3C continuous discharge for moderate-current devices
- 3 Pin JST XH discharge port for plug-in wiring
- Charges at 1C to a maximum of 8.4V
- Compact 103g pack fits tight enclosures
- No integrated BMS, so external protection is required
Ideal For
- Makers building compact 2S Li-ion powered devices
- Technicians servicing portable test instruments
- Hobbyists assembling custom battery enclosures
- Users replacing a 2S1P 18650 pack in a compatible device
- Builders who manage charging and protection externally
Buying Tip
Confirm your device accepts a 2S Li-ion pack with an 8.4V maximum charge voltage and uses a matching 3 Pin JST XH connector, and plan for external protection since no BMS is included.
Elecvora expert review
Our verdict
A neatly assembled 2S1P Molicel 18650-M35A pack that gives builders a pre-wired 7.4V 3500mAh source with a convenient JST XH port. It is a sound choice for disciplined builders who pair it with proper external protection and a compatible 2S charger.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-wired 2S1P pack saves assembly time
- 3500mAh capacity with 3C continuous discharge
- Convenient 3 Pin JST XH discharge port
- Compact 103g form for tight enclosures
Cons
- No integrated BMS, so external protection is required
- Requires a compatible 2S Li-ion charger
- Connector must match your device's wiring
Best for
Builders of compact 2S Li-ion devices who manage charging and protection externally
Not ideal for
Plug-and-play users expecting built-in protection or a matched charger in the box
Specifications
| Nominal Capacity (mAh) | 3500 mAh |
|---|---|
| Nominal Voltage (V) | 7.4 |
| Continuous Discharge Current (A) | 3C |
| BMS (Y/N) | N |
| Discharge Port | 3 Pin JST XH |
| Max. Charging Voltage (V) | 8.4 |
| Max. Discharging Voltage (V) | 5.8 |
| Charging Current | 1C |
| Weight (g) | 103 |
| Shipping Weight | 0.149 kg |
| Shipping Dimensions | 9 × 3 × 3 cm |
What's in the box
- 1 x Molicel A Grade INR 18650-M35A 7.4V 3500mAh 3C 2S1P (TX) Li-ion Battery Pack
Frequently Asked Questions
What voltage does this pack deliver?
Does this battery pack include a BMS?
What connector does the pack use?
How should I charge it?
What is included in the package?
What discharge current can it handle?
Overview
The Molicel A Grade INR 18650-M35A 7.4V 3500mAh 3C 2S1P (TX) Li-ion Battery Pack is a ready-assembled two-cell pack built around Molicel 18650-M35A cells. Two cells are wired in series to give a 7.4V nominal output, and the pack is terminated with a 3 Pin JST XH discharge port. It is aimed at builders and technicians who want a tidy, pre-wired 2S pack instead of loose cells and spot-welded tabs.
Key Features
- 2S1P architecture: a single parallel string of two series cells for a 7.4V nominal pack.
- 3500mAh nominal capacity: a useful reserve for portable electronics and instruments.
- 3C continuous discharge: supports devices that draw moderate current.
- 1C charging: straightforward charge rates for compatible 2S Li-ion chargers.
- 3 Pin JST XH port: a common connector type for plug-in wiring in custom builds.
- Compact form: the pack weighs 103g, making it easy to fit into small housings.
Specifications Explained
Nominal voltage and capacity: 7.4V is the nominal figure for a 2S Li-ion pack; the working range runs between the 8.4V maximum charging voltage and the 5.8V maximum discharging voltage. Capacity is rated at 3500mAh.
Discharge and charge rates: a 3C continuous discharge rating describes the pack's current capability relative to capacity, while 1C charging sets the charge rate. Always stay within these limits and use a charger set for 2S Li-ion chemistry.
No BMS: the pack does not include a battery management system. Over-discharge, over-current and cell balancing protection must come from the host device or an external protection board.
Connector: the 3 Pin JST XH discharge port defines how the pack connects to your device, so confirm your wiring matches the pinout before use.
Compatibility and Requirements
This pack is intended for devices designed for a 2S Li-ion supply with a 7.4V nominal voltage and a maximum charging voltage of 8.4V. You will need a compatible 2S Li-ion charger and a host device or external protection circuit, since no BMS is built in. The 3 Pin JST XH port must match the connector on your device or wiring harness.
Typical Uses
Typical applications include portable electronics, test instruments, custom hobby builds and other compact devices that accept a 2S Li-ion pack and draw current within the 3C continuous rating. Because the pack has no BMS, it is best suited to projects where the builder can manage charging and protection properly.
What's in the Box
- 1 x Molicel A Grade INR 18650-M35A 7.4V 3500mAh 3C 2S1P (TX) Li-ion Battery Pack
Quick specs
- Nominal Capacity (mAh)
- 3500 mAh
- Nominal Voltage (V)
- 7.4
- Continuous Discharge Current (A)
- 3C
- BMS (Y/N)
- N
- Discharge Port
- 3 Pin JST XH
- Max. Charging Voltage (V)
- 8.4
















