Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A two-piece black ABS case that joins a Raspberry Pi 4 Model B and the 7 inch touchscreen into one freestanding unit with full port access and a removable backplate. Fixing screws are included, and the case doubles as a display stand.

Key Highlights

  • Two-piece ABS enclosure designed for Raspberry Pi 4 Model B with the 7 inch touchscreen
  • Case body doubles as a stand so the display can sit upright
  • Removable backplate for GPIO access and wall mounting
  • Full access to ports and controls on the Pi
  • Dedicated holding slot for a Pi Camera
  • Ventilated design supports passive cooling
  • Fixing screws included for straightforward assembly

Ideal For

  • Makers building a desk dashboard with a Pi 4 and 7 inch touchscreen
  • Home automation users mounting a touch control panel on a wall
  • Educators assembling classroom display projects
  • Retail or event teams building simple kiosk units
  • Hobbyists adding a Pi Camera to a touchscreen setup

Buying Tip

Confirm you already own the Raspberry Pi 4 Model B and the 7 inch touchscreen, since neither is included with this case.

Elecvora expert review

Our verdict

A practical, low-cost way to turn a Pi 4 and 7 inch touchscreen into one solid unit, with sensible details like the removable backplate and camera slot. It is an enclosure, so budget for the board and display separately.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines board and display into a single freestanding assembly
  • Removable backplate keeps GPIO access and wall mounting possible
  • Camera slot and ventilation built in
  • Light at around 100 g with screws included

Cons

  • Raspberry Pi 4 Model B and touchscreen are not included
  • ABS shell offers passive cooling only, so heavy workloads may need extra airflow
  • Limited to the specified Pi 4B and 7 inch touchscreen pairing

Best for

Owners of a Pi 4 and 7 inch touchscreen who want a tidy, upright enclosure

Not ideal for

Builds using other Pi models, other screen sizes or actively cooled high-load setups

Specifications

CompatibilityPi 4B
Width (mm)44
Weight (g)100
Shipping Weight0.127 kg
Shipping Dimensions20 × 12 × 5 cm

What's in the box

  • 1 x Raspberry Pi 4 Model B Touchscreen Display Case - ABS, Black
  • Fixing screws

Frequently Asked Questions

Does the package include the Raspberry Pi board or the screen?
No. The package contains the case and fixing screws only. You need to supply the Raspberry Pi 4 Model B and the 7 inch touchscreen.
Which Raspberry Pi model does this case fit?
It is designed for the Raspberry Pi 4 Model B with the 7 inch touchscreen. Other boards and screen sizes are not covered.
Can I still reach the GPIO pins with the case fitted?
Yes. The backplate is removable, which gives access to the GPIO header for add-on boards and wiring.
Can the case be mounted on a wall?
Yes. The removable backplate is intended as the mounting point for wall installation.
Does the case include a fan?
No fan is listed. The shell is ventilated for passive cooling, so airflow depends on your environment and workload.
How should I clean the case?
Wipe the ABS shell with a soft, slightly damp cloth. Avoid solvents and harsh cleaners, and do not overtighten the screws when reassembling.

Overview

The MULTICOM PRO display case is a black ABS enclosure made to hold a Raspberry Pi 4 Model B and the 7 inch touchscreen as a single assembly. Instead of leaving the board and screen loose on the desk, the two-piece shell clamps them together so the finished unit behaves like one device. The case also acts as a stand, letting the display rest upright at a usable angle.

This is an enclosure only. The Raspberry Pi 4 Model B board and the touchscreen are not part of the package, so it is aimed at owners who already have both parts and want to finish the build cleanly.

Key Features

  • Two-piece ABS construction: a rigid shell that protects the board and screen while keeping the assembly light at around 100 g.
  • Built-in stand: the case supports the display upright for desk, counter or bench use.
  • Removable backplate: take it off for GPIO header access, or use it as the mounting point for a wall installation.
  • Port and control access: cutouts keep the Pi's connectors and controls reachable without dismantling the case.
  • Pi Camera slot: a dedicated holder keeps a camera module in place.
  • Ventilation: openings in the shell support passive airflow around the board.

Specifications Explained

Compatibility: the case is specified for the Raspberry Pi 4 Model B paired with the 7 inch touchscreen. Check your board and display before ordering, since other models and screen sizes are not covered by this listing.

Width: the 44 mm figure refers to the case profile. Weight: at roughly 100 g for the case, the enclosure adds very little to the finished assembly, which matters if you plan to wall mount it or carry it between locations.

Shipping: the packed parcel measures about 20 x 12 x 5 cm and weighs around 0.127 kg, so it is a compact, light shipment.

Compatibility and Requirements

You need a Raspberry Pi 4 Model B and the 7 inch touchscreen, both sold separately. Assembly uses the included fixing screws. Because the backplate can be removed, GPIO-based add-on boards and wiring remain possible after the case is fitted.

Typical Uses

  • Desktop dashboards and status displays
  • Touch control panels for home automation or workshop projects
  • Media and information front ends in a living room or office
  • Kiosk-style builds for events, retail or education
  • Wall-mounted displays where the backplate serves as the fixing point

What's in the Box

  • 1 x Raspberry Pi 4 Model B Touchscreen Display Case, ABS, Black
  • Fixing screws

Raspberry Pi board and touchscreen are not included.

Quick specs

Compatibility
Pi 4B
Width (mm)
44
Weight (g)
100
Shipping Weight
0.127 kg
Shipping Dimensions
20 × 12 × 5 cm
See all specifications