At a glance
This test & measuring module is a good fit for makers, students and electronics hobbyists.
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Overview
The MX-S3 SDR Radio Transceiver Switcher/Auxiliary Receiver Compatible with IC7100 FT-891 450D 991A is listed in our test & measuring module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The MX-S3 SDR TR SWITCH is a high-isolation transceiver switch designed to expand a transceiver's radio range with a second receiver, such as an SDR software receiver or connecting a real-time spectrum analyzer. It also supports three auxiliary ports for controlling the power amplifier and receiver squelch function.
Features:
1. Dual-Channel Receiver Expansion: Connects a primary transceiver and an SDR receiver, automatically switching antenna paths when the primary device transmits.
2. Dual Control Modes:
- Key Control (SEND Port): Connects to the transceiver's key control port via a 3.5mm cable (supports YAESU/ICOM).
- RF Sense: Automatically switches upon detecting a transmitted signal (requires shorting a jumper and adjusting the delay).
3. Receiver Protection: Built-in protection circuitry prevents damage to the receiving device due to excessive transmit power.
4. Auxiliary Controls (AUX1/2/3):
- AUX1/AUX2 (MOSFET Control): Outputs a low level (100mA load) when transmitting, used to mute the receiver.
- AUX3 (Relay Control): Selectable low/high level (1A load) when transmitting. Set to normally open/closed via a jumper to control amplifier start and stop.
Specifications:
Power Supply: 12V ±20% / 500mA
Impedance: 50Ω
Isolation: -70dB
Insertion Loss: 0.15dB
Power Handling: 200W (CW/SSB)
Frequency Range: 0.5 MHz – 440 MHz
Auxiliary Ports: AUX1/AUX2: 100mA/30V (MOSFET controlled, transmit low)
AUX3: 1A/30V (relay controlled, jumper selectable, normally open/normally closed)
Delay Adjustment: VR1: 40ms – 7s (counterclockwise increases time)
Package Included:
1 x SDR Switcher
1 x Antenna Cable
1 x Control Cable
1 x Power Cable
1 x Power Cord
3 x Converter






Explore more
Cheaper Alternatives

Geekcreit? ESP32 ESP32S 18650 Battery Charge Shield V3 Micro USB Type-A USB 0.5A
3Pcs Geekcreit® 0.28 Inch Yellow LED 2.6V-30V Mini Digital Volt Meter Voltage Tester Two Line Voltmeter

0.56" Blue Red Dual LED Display Mini Digital Voltmeter Ammeter DC 100V 100A Panel Amp Volt Voltage Current Meter Tester









