Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Nebulae's FCC certified mini PCIe LoRa based Concentrator Board  — image 1
Hover to zoom

1 / 2 · Click to enlarge

Nebulae

Nebulae's FCC certified mini PCIe LoRa based Concentrator Board 

23+ bought in past month
AI Summary
LORA Module for premium buyers

The Nebulae's FCC certified mini PCIe LoRa based Concentrator Board  by Nebulae is a premium lora module designed for premium buyers. It features Item Type: LoRa Gateway Concentrator Module and Frequency Band: 915 MHz.

compact and portable
₹12,499
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹12,499
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: LoRa Gateway Concentrator Module
Frequency Band: 915 MHz
Processor: SX1302
Interface: USB, 1 SPI
Bandwidth: 125/250/500
Receiver Sensitivity: –125 dBm @ SF7, –139 dBm @ SF12

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
FCC
Share:
SKU: robu-3038555Category: LORA Module

About This Product

The Nebulae's FCC certified mini PCIe LoRa based Concentrator Board  by Nebulae is a premium lora module designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: LoRa Gateway Concentrator Module
  • Frequency Band: 915 MHz — smooth, flicker-free operation
  • Processor: SX1302 — smooth, lag-free performance
  • Interface: USB, 1 SPI — compatible with modern devices
  • Bandwidth: 125/250/500
  • Receiver Sensitivity: –125 dBm @ SF7, –139 dBm @ SF12
  • Output Power: Up to 27 dBm
  • Antenna Connector Type: U.FL — compatible with modern devices

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Nebulae FCC certified mini PCIe LoRa concentrator board is a compact, high-performance gateway solution designed for long-range, low-power IoT applications. Equipped with the advanced SX1302 baseband processor, this module supports LoRa classes A, B, and C with multi-SF reception, enabling robust, simultaneous communication across multiple channels. Operating in the 915 MHz band, it provides excellent sensitivity (as low as –139 dBm) and a range of up to 15 km line-of-sight. LoRa Concentrator Board With USB and SPI interfaces, built-in status LEDs, and U.FL antenna connector, it's perfect for both urban and rural deployments. Its mini PCIe form factor ensures seamless integration into embedded systems.


Features:

  1. Compact Mini PCIe form factor: 50.95 × 30.00 mm
  2. Supports 915 MHz LoRa frequency band
  3. SX1302 baseband processor with multi-SF reception (SF5–SF12)
  4. Dual SX1250 Tx/Rx and one SX1261 Rx front-ends
  5. LoRa Classes A, B, and C supported
  6. USB & SPI interfaces, status LEDs, and U.FL connector

Package Includes:

1 x Nebulae's FCC certified mini PCIe LoRa based Concentrator Board

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.