Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 3W infrared light board adds automatic night vision to Raspberry Pi cameras using an onboard photoresistor and adjustable threshold. It mounts directly to compatible camera modules and activates in low light.

Key Highlights

  • 3W infrared LED for night vision illumination
  • Onboard photoresistor detects ambient light levels
  • Adjustable resistor sets automatic on/off threshold
  • 5V operating voltage, 600mA max current
  • Screw holes for mounting and power connection
  • Compact and lightweight design

Ideal For

  • Raspberry Pi enthusiasts building night vision cameras
  • DIY surveillance system makers
  • Wildlife monitoring hobbyists
  • Students learning about infrared and light sensing
  • Makers needing automatic IR illumination for close-range projects

Buying Tip

Remember to order the compatible camera module separately, as this listing includes only the infrared light boards and screws.

Elecvora expert review

Our verdict

A practical add-on that simplifies night vision for Raspberry Pi cameras by automating IR illumination based on ambient light. It is compact and easy to integrate, though users should be mindful of power and cooling.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Automatic light sensing with adjustable threshold
  • Direct mounting to compatible camera boards
  • Compact and lightweight
  • Clear night vision at close range

Cons

  • Camera module not included
  • May require additional cooling for the Pi
  • Effective range limited to about 3 metres

Best for

Raspberry Pi users wanting automatic night vision for close-range projects

Not ideal for

Those needing long-range night vision or a complete camera kit

Specifications

Item TypeInfrared Light
Operating Voltage (V)5
Max. Operating Current (A)600
Power Rating3
Shipping Weight0.05 kg
Shipping Dimensions5 × 5 × 5 cm

What's in the box

  • 2 x Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera
  • 1 x Screw Set

Frequently Asked Questions

Does this include a camera module?
No, the package includes only the infrared light boards and a screw set. A compatible camera module must be purchased separately.
How do I connect the infrared light to my Raspberry Pi?
The board mounts directly to a compatible camera PCB using the screw holes, which also provide power. No additional wiring is needed for the light itself.
Can I adjust when the infrared light turns on?
Yes, the onboard adjustable resistor lets you set the ambient light threshold at which the LED activates.
What is the effective range for night vision?
Ideal imaging distance is within 3 metres. Beyond that, up to about 6 metres, the camera may capture only blurry outlines.
Will this cause my Raspberry Pi to overheat?
The 3W LED can increase the Pi's temperature, so using a heatsink is recommended, especially during extended use.
What power supply do I need?
The board operates at 5V and draws up to 600mA. Ensure your power source can supply enough current for both the Pi and the light.

Overview

The Generic Night Vision Sensitive Infrared Light 3W is a purpose-built add-on for Raspberry Pi camera projects that need reliable night vision. It combines a high-power 3W infrared LED with an onboard photoresistor and an adjustable resistor, giving you automatic control over when the light turns on. The board is designed to attach directly to compatible camera modules using its screw holes, which also provide the electrical connection. This makes it a tidy, integrated solution for adding infrared illumination without complex wiring.

Key Features

  • Automatic light sensing: The onboard photoresistor monitors ambient light and triggers the infrared LED when conditions fall below your set threshold.
  • Adjustable threshold: A small potentiometer (adjustable resistor) lets you fine-tune the light level at which the LED activates, so you can adapt to different environments.
  • Direct mounting: Screw holes serve both as physical attachment points and power contacts when connected to a compatible camera PCB.
  • Compact form factor: The small board adds minimal bulk to your camera setup, making it suitable for tight enclosures.
  • 3W infrared output: Provides enough illumination for night vision capture at close range, ideal for indoor or short-distance outdoor monitoring.

Specifications Explained

Operating voltage (5V): The board is designed to run from a 5V supply, which is standard for Raspberry Pi GPIO power. Ensure your power source can deliver the required current.

Max operating current (600mA): At full power, the board can draw up to 600mA. This is significant for a Raspberry Pi's onboard regulator, so a separate 5V supply or a powered hub is recommended for stable operation.

Power rating (3W): The infrared LED consumes 3 watts, producing a focused beam of invisible light. This power level is suitable for illuminating scenes up to a few metres away; note that image clarity decreases beyond approximately 3 metres.

Compatibility and Requirements

This infrared light board is compatible with the Infrared IR Night Vision Surveillance Camera Module 500W Webcam (sold separately) and can add night vision functionality to Raspberry Pi Camera (E) or Raspberry Pi Camera (F). It requires a 5V power source and a compatible camera module for mounting. No camera module is included.

Typical Uses

  • DIY home surveillance with Raspberry Pi
  • Wildlife camera traps for nocturnal animals
  • Night-time timelapse photography
  • Low-light monitoring in sheds or garages
  • Educational projects exploring infrared imaging

What's in the Box

Package includes two Night Vision Sensitive Infrared Light 3W boards and a screw set for mounting.

Quick specs

Item Type
Infrared Light
Operating Voltage (V)
5
Max. Operating Current (A)
600
Power Rating
3
Shipping Weight
0.05 kg
Shipping Dimensions
5 × 5 × 5 cm
See all specifications

Explore more