
1 / 3 · Click to enlarge
At a glance
This espressif dev. boards and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name ESP32-S NodeMCU-32 V1.3; operating voltage 5V; interface UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S. Check that your power source supplies 5V before connecting it.
Key Highlights
- Wireless connection
- Model No. / Name: ESP32-S NodeMCU-32 V1.3
- Operating Voltage: 5V
- Interface: UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | ESP32-S NodeMCU-32 V1.3 |
|---|---|
| Operating Voltage | 5V |
| Interface | UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S |
| No. of Pins | 38 |
| Mounting Style | Through Hole |
| Length (mm) | 55 |
| Width (mm) | 25 |
| Weight (g) | 9 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 9 × 5 × 2 cm |
Overview
The NodeMCU ESP-32S ESP-32E WiFi Development Board Serial WiFi Bluetooth Module is listed in our espressif dev. boards and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: ESP32-S NodeMCU-32 V1.3 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Operating Voltage: 5V (match this to your power supply; too high a voltage can damage the part)
- Interface: UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S (confirm your cable or board uses the same connector)
- No. of Pins: 38
- Mounting Style: Through Hole
- Length (mm): 55 (measure your mounting space before ordering)
- Width (mm): 25 (measure your mounting space before ordering)
- Weight (g): 9 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
NodeMCU ESP-32S / ESP-32E WiFi Development Board is an open-source IoT development board based on the powerful ESP32S dual-core microcontroller. It is designed for rapid prototyping of Wi-Fi and Bluetooth enabled applications.
With integrated USB-to-serial interface, onboard voltage regulation, and rich peripheral support, this board simplifies wireless project development. Compatible with Arduino IDE and NodeMCU Lua firmware, it suits both beginners and professionals building connected devices, smart automation systems, and embedded IoT solutions.
Features:
- ESP32S dual-core microcontroller
- Built-in Wi-Fi and Bluetooth 4.2
- Arduino IDE and Lua programmable
- 38 GPIO pins for flexible I/O
- Integrated USB-to-serial interface
- Supports multiple communication protocols
Package Includes:
1 x NodeMCU ESP-32S ESP-32E WiFi Development Board Serial WiFi Bluetooth ModuleQuick specs
- Model No. / Name
- ESP32-S NodeMCU-32 V1.3
- Operating Voltage
- 5V
- Interface
- UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S
- No. of Pins
- 38
- Mounting Style
- Through Hole
- Length (mm)
- 55













