Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A low-cost USB dongle built on the nRF52840 SoC that supports Bluetooth 5, Thread, Zigbee and 802.15.4 for wireless development. It pairs with nRF Connect for Desktop and exposes 15 GPIO plus a programmable RGB LED.

Key Highlights

  • nRF52840 SoC with Arm Cortex-M4 and floating point support
  • Multiprotocol radio covering Bluetooth 5, Thread, Zigbee and 802.15.4
  • Integrated 2.4 GHz PCB antenna for compact USB operation
  • 15 GPIO accessible via castellated solder points
  • User-programmable button, RGB LED and green LED
  • Wide 1.7V to 5.5V operating range from USB or external supply

Ideal For

  • Embedded developers prototyping Bluetooth 5 and Thread devices
  • Engineers using nRF Connect for Desktop for wireless testing
  • Makers building small Zigbee or 802.15.4 sensor projects
  • Students learning Nordic SoC development on a low-cost target
  • Hardware teams needing a compact multiprotocol USB radio

Buying Tip

Remember that the dongle has no debug support, so choose it for programming and USB communication work rather than step-through debugging.

Elecvora expert review

Our verdict

A practical, low-cost way to get a multiprotocol Nordic radio onto a USB port for desktop-assisted development. It covers many wireless standards in one small board, provided you do not need debug support.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports Bluetooth 5, Thread, Zigbee, 802.15.4, ANT and proprietary 2.4 GHz
  • Integrated antenna and USB interface keep setup simple
  • 15 GPIO plus programmable button and LEDs for custom work
  • Works with nRF Connect for Desktop and nRFUtil

Cons

  • No debug support, only programming and USB communication
  • GPIO access requires soldering to castellated pads
  • Custom firmware work expects familiarity with Nordic tooling

Best for

Developers who want an inexpensive multiprotocol USB target for nRF Connect for Desktop

Not ideal for

Engineers who need hardware debugging or a plug-and-play consumer Bluetooth adapter

Specifications

Voltage Rating1.7 to 5.5
Supply Voltage1.7 to 5.5
Shipping Weight0.01 kg
Shipping Dimensions6 × 5 × 1 cm

What's in the box

  • 1 x Nordic Semiconductor nRF52840 Dongle Bluetooth module

Frequently Asked Questions

Which wireless protocols does the dongle support?
It supports Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary protocols.
Can I debug code on this dongle?
No. The dongle has no debug support; it only supports programming the device and communicating through USB.
What voltage does it need?
It operates from 1.7V to 5.5V, either from USB or an external supply within that range.
How do I program it?
Use nRF Connect for Desktop, which can program it automatically, or program through nRFUtil. Custom applications can also be compiled and downloaded.
How many GPIO are available?
15 GPIO are accessible from castellated solder points along the edge of the board.
What is included with the product?
The package contains one Nordic Semiconductor nRF52840 Dongle Bluetooth module.

Overview

The Nordic Semiconductor nRF52840 Dongle is a small USB device that turns a standard USB port into a flexible short-range wireless development target. It is built around the nRF52840 SoC and is intended as low-cost hardware for working with Nordic wireless standards, particularly alongside nRF Connect for Desktop.

Because it supports Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary protocols, one dongle can serve several projects instead of requiring a separate board for each protocol.

Key Features

  • Multiprotocol 2.4 GHz radio with Bluetooth 5 support
  • Arm Cortex-M4 processor with floating point and DSP instruction support
  • Arm CryptoCell CC310 cryptographic accelerator
  • Integrated PCB antenna, so no external antenna is needed
  • User-programmable button, RGB LED and green LED
  • 15 GPIO on castellated edge pads for soldering
  • USB interface connected directly to the nRF52840 SoC

Specifications Explained

The 1.7V to 5.5V rating means the dongle can run from a USB port or from an external supply within that range. The broad window gives flexibility when the board is used outside a standard USB socket.

The 15 GPIO are brought out on castellated solder points along the edge, which lets you attach wires or headers for simple external circuits. The onboard button and LEDs are user-programmable, so they can be used for input and status indication in your own firmware.

The Cortex-M4 core with floating point support and the CC310 cryptographic accelerator are part of the SoC, supporting both general processing and cryptographic tasks in custom applications.

Compatibility and Requirements

The dongle is designed for use with nRF Connect for Desktop and is supported by most of its apps, which can program the device automatically when needed. Programming is also possible through nRFUtil, and custom applications can be compiled and downloaded. Example applications are available in the nRF5 SDK under the board name PCA10059.

There is no debug support on the dongle: it provides programming and USB communication only. Plan for that limitation if your workflow depends on step-through debugging.

Typical Uses

  • Wireless development and testing with nRF Connect for Desktop
  • Prototyping Bluetooth 5, Thread, Zigbee or 802.15.4 projects
  • Running custom firmware on a low-cost Nordic target
  • Adding a multiprotocol USB radio to a desktop setup

What's in the Box

1 x Nordic Semiconductor nRF52840 Dongle Bluetooth module.

Quick specs

Voltage Rating
1.7 to 5.5
Supply Voltage
1.7 to 5.5
Shipping Weight
0.01 kg
Shipping Dimensions
6 × 5 × 1 cm
See all specifications