
1 / 2 · Click to enlarge
At a glance
Made by NXP, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; flash memory 32KB; processor type 32-bit ARM Cortex-M0+ core.
Key Highlights
- Item Type: Development Board
- Flash Memory: 32KB
- Processor Type: 32-bit ARM Cortex-M0+ core
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Development Board |
|---|---|
| Flash Memory | 32KB |
| Processor Type | 32-bit ARM Cortex-M0+ core |
| Clock Frequency | 4 |
| Additional Specs. | Analog peripherals: 12-bit SAR ADC w/ DMA support - High-speed comparator, Communication peripherals: One 8-bit Serial Peripheral Interfaces (SPI) – Two I2C modules – One low-power UART |
| Processor | 32-bit ARM Cortex-M0+ core |
| Memory Capacity | 32 KB flash , 4 KB SRAM |
| Clocks | 4 MHz and 32 kHz internal reference clock |
| Timer/counters | Two 2-channel Timer/PWM modules - Low-power Timer (LPT) - System tick timer |
| Shipping Weight | 0.067 kg |
| Shipping Dimensions | 17 × 10 × 3 cm |
Overview
The NXP Development Board FRDM-KL02Z MKL02Z32VFM4 MCU, Capacitive Touch Slider, Accelerometer, Tri Color LED, made by NXP, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Development Board
- Flash Memory: 32KB (more memory leaves room for larger programs and buffers)
- Processor Type: 32-bit ARM Cortex-M0+ core (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Clock Frequency: 4 (make sure the rest of your system works at this frequency)
- Additional Specs.: Analog peripherals: 12-bit SAR ADC w/ DMA support - High-speed comparator, Communication peripherals: One 8-bit Serial Peripheral Interfaces (SPI) – Two I2C modules – One low-power UART (confirm your cable or board uses the same connector)
- Processor: 32-bit ARM Cortex-M0+ core (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Memory Capacity: 32 KB flash , 4 KB SRAM (more memory leaves room for larger programs and buffers)
- Clocks: 4 MHz and 32 kHz internal reference clock (make sure the rest of your system works at this frequency)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Kinetis L Series KL02 family MCU in a 32QFN package
- I/O headers for easy access to MCU I/O pins
- Freescale 3-axis accelerometer sensor, MMA8451Q
- Capacitive touch slider using GPIO method based on TSS lib
- Reset pushbutton
Package Includes:
1 x NXP Development Board FRDM-KL02Z MKL02Z32VFM4 MCUQuick specs
- Item Type
- Development Board
- Flash Memory
- 32KB
- Processor Type
- 32-bit ARM Cortex-M0+ core
- Clock Frequency
- 4
- Additional Specs.
- Analog peripherals: 12-bit SAR ADC w/ DMA support - High-speed comparator, Communication peripherals: One 8-bit Serial Peripheral Interfaces (SPI) – Two I2C modules – One low-power UART
- Processor
- 32-bit ARM Cortex-M0+ core



















