Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Kit; flash memory 256KB; processor ARM Cortex-M4 core with DSP. Check that your power source supplies 1.71V–3.6V before connecting it.

Key Highlights

  • Item Type: Kit
  • Flash Memory: 256KB
  • Processor: ARM Cortex-M4 core with DSP

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeKit
Flash Memory256KB
ProcessorARM Cortex-M4 core with DSP
Operating Frequency (Hz)100 MHz core
Operating Voltage (V)1.71V–3.6V
LCD display306 segment
Shipping Weight0.202 kg
Shipping Dimensions24 × 15 × 3 cm

Overview

The NXP Development Kit KWIKSTIK-K40 K40X256VLQ100 MCU, USB Touch Sensing and Segment LCD Functionality is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Kit
  • Flash Memory: 256KB (more memory leaves room for larger programs and buffers)
  • Processor: ARM Cortex-M4 core with DSP (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Operating Frequency (Hz): 100 MHz core (make sure the rest of your system works at this frequency)
  • Operating Voltage (V): 1.71V–3.6V (match this to your power supply; too high a voltage can damage the part)
  • LCD display: 306 segment (measured diagonally; compare with the space you have before ordering)
  • Shipping Weight: 0.202 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 24 × 15 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Buy KWIKSTIK-K40 is an ultra-low-cost development tool for Kinetis ARM Cortex-M4 microcontrollers. The KwikStik development tool is a cost-effective, all-in-one solution for evaluating, developing, and debugging with Kinetis ARM Cortex-M4 MCUs. It features the K40X256VLQ100 MCU with USB, capacitive touch sensing, and segment LCD functionality and combines powerful silicon and software technology within its sleek, small enclosure. It comes pre-flashed with demonstration software to exercise a small portion of the capabilities of the Kinetis K40X256 device and the KwikStik hardware. The onboard Segger J-Link debug interface allows the user to evaluate the features of the onboard K40 MCU or to develop, debug and program their own target hardware based on any Kinetis MCU. The KWIKSTIK-K40 can be combined and used with several peripheral modules in the tower system, it can also be operated as a standalone debug tool.

Features:

  1. MicroSD card slot
  2. Capacitive touch sensing interface
  3. General purpose tower plug-in (TWRPI) socket
  4. Manganese lithium rechargeable battery
  5. Flexible silicone enclosure
                                       note: For more technical detail go through Datasheet in the attachment section

Package Includes:

1 x NXP Development Kit KWIKSTIK-K40 K40X256VLQ100 MCU

Quick specs

Item Type
Kit
Flash Memory
256KB
Processor
ARM Cortex-M4 core with DSP
Operating Frequency (Hz)
100 MHz core
Operating Voltage (V)
1.71V–3.6V
LCD display
306 segment
See all specifications