
At a glance
Made by NXP, this arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.2 kg.
Key Highlights
- Shipping Weight: 0.2 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.2 kg |
|---|---|
| Shipping Dimensions | 10 × 10 × 2 cm |
Overview
The NXP FRDM-KL27Z Kinetis KL17/KL27 ARM Cortex-M0+ Development Board with Capacitive Touch Slider, Accelerometer and Magnetometer, made by NXP, is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.2 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 10 × 10 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The NXP FRDM-KL27Z Development Board is a feature-rich evaluation platform built around the MKL27Z64VLH4 ARM Cortex-M0+ microcontroller. Running at 48MHz with 64KB Flash and 16KB SRAM, it provides an excellent platform for embedded system development and rapid prototyping. Integrated peripherals including a capacitive touch slider, MMA8451Q accelerometer, MAG3110 magnetometer, thermistor sensor, and RGB LED allow developers to build interactive and sensor-based applications without additional hardware. Arduino R3 compatible headers simplify hardware expansion, while the OpenSDA interface enables drag-and-drop programming, debugging, and virtual COM communication. Flexible USB, coin-cell, and external power options make the board suitable for portable designs. It is an excellent choice for students, makers, and engineers developing low-power ARM Cortex-M0+ applications.
Features:
- ARM Cortex-M0+ MKL27Z64VLH4 microcontroller
- 48MHz CPU with 64KB Flash memory
- 16KB SRAM for embedded applications
- Integrated capacitive touch slider
- On-board MMA8451Q 3-axis accelerometer
- MAG3110 digital magnetometer included
- Arduino R3 compatible expansion headers
- OpenSDA interface with drag-and-drop programming and debugging
Specifications:
- Product Type: Development Board
- MCU: MKL27Z64VLH4
- Processor Core: ARM Cortex-M0+
- CPU Frequency: 48MHz
- Flash Memory: 64KB
- SRAM: 16KB
- Package: 64LQFP
- Capacitive Touch: Touch Slider
- Accelerometer: MMA8451Q
- Magnetometer: MAG3110
- Temperature Sensor: Thermistor
- LED: RGB (Tri-color) LED
- User Switches: 2 (SW1, SW3)
- Crystal: 32.768kHz
- Power Options: USB, Coin Cell Battery, External Source
- Debug Interface: OpenSDA
- Programming: Mass Storage Drag-and-Drop
- Debug Support: CMSIS-DAP, P&E Debug
- Bootloader Interfaces: USB, UART, I2C, SPI
- Expansion Headers: Arduino R3 Compatible
- Dimesions: 85 mm × 54 mm
- Weight: 140 g
Package Includes:
1 x NXP FRDM-KL27Z Kinetis KL17/KL27 ARM Cortex-M0+ Development Board with Capacitive Touch Slider, Accelerometer and Magnetometer



















