Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2-metre, 8mm expandable nylon braided sleeve that wraps wire bundles for abrasion protection and tidy routing. It stretches to about 150% of its diameter, so it fits over bulky connectors and adjusts to uneven harness shapes.

Key Highlights

  • 8mm nominal diameter expands up to 150% for flexible fitting
  • Nylon and nylon/PET weave balances softness with abrasion resistance
  • Handles -50°C to 150°C with a 230°C melting point
  • UL94V-2 flame rating for electrical harness use
  • Open braid allows airflow to reduce trapped moisture
  • Lightweight at 10 g per 2-metre length

Ideal For

  • 3D printer builders tidying hot-end and motor wiring
  • RC and drone hobbyists protecting exposed wire runs
  • Robotics and automation hobbyists bundling moving cables
  • Electronics makers organising enclosure wiring
  • DIY repairers covering worn or exposed cable bundles

Buying Tip

Measure your bundle at its widest point, including connectors, and confirm it fits within the 8mm sleeve's 150% expansion before ordering.

Elecvora expert review

Our verdict

A practical, low-cost sleeving option for small harnesses where flexibility and airflow matter more than sealing. The 150% expansion makes it forgiving during installation, though it is not a substitute for sealed or shielded conduit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Expands up to 150% for easier fitting over connectors
  • Soft nylon blend is gentle on wire insulation
  • Wide -50°C to 150°C temperature range
  • UL94V-2 flame rating
  • Very light at 10 g per 2 metres

Cons

  • Open braid does not seal out water or dust
  • No EMI shielding
  • Ends may fray if not secured after cutting

Best for

Small wire harnesses in 3D printers, RC models and electronics projects

Not ideal for

Waterproof or EMI-shielded cable runs

Specifications

MaterialNylon, Nylon/PET
ColorBlack
Diameter (mm)8
Expansion RatioUp to 150%
Melting Point (°C)230 +/- 5
Tinting Strength (°C)100 +/- 5
Fireproofing GradeUL94V-2
Temperature Endurance (°C)-50 to 150
Length (m)2 Meter
Weight (g)10
Shipping Weight0.005 kg
Shipping Dimensions8 × 6 × 4 cm

Frequently Asked Questions

What does the 150% expansion mean in practice?
The sleeve can open to about one and a half times its 8mm resting diameter, which helps it pass over connectors and fit bundles that vary in size.
Does this sleeve protect against water?
No. The braided structure is open to allow airflow, so it does not provide a watertight seal. It is intended for abrasion protection and cable management.
What temperature range can it handle?
The stated operating range is -50°C to 150°C, with a melting point of 230 ± 5°C.
How long is the sleeve and what does it weigh?
Each piece is 2 metres long and weighs approximately 10 g.
Can I cut it to a shorter length?
Yes. Cut it with sharp scissors, then secure the cut end with a cable tie or heat-shrink to keep the braid from fraying.
Is it flame retardant?
It carries a UL94V-2 fireproofing grade, which indicates resistance to flame spread as a material property.

Overview

The Generic Nylon 8mm Expandable Braided Sleeve is a simple, effective way to bundle and protect wiring. The woven nylon and nylon/PET construction creates a flexible tube that expands to roughly 150% of its resting diameter, letting it pass over connectors and then settle snugly around the harness. At 8mm nominal diameter and 2 metres long, it is a practical size for small to medium cable runs.

Because the braid is open rather than sealed, air can move through the sleeve, which helps avoid trapping moisture around cables. The material is rated for continuous temperatures from -50°C to 150°C, with a melting point of 230°C and a UL94V-2 flame rating, making it suitable for many electrical and light industrial environments.

Key Features

  • Expandable weave: stretches up to 150% of the base diameter for easier installation over plugs and bulky connectors.
  • Dual-material construction: nylon and nylon/PET yarns provide a softer feel than plain PET sleeving while resisting abrasion.
  • Temperature tolerance: works from -50°C to 150°C, with a melting point of 230 ± 5°C.
  • Flame rated: UL94V-2 fireproofing grade for electrical bundling tasks.
  • Lightweight: just 10 g for the full 2-metre length, so it adds little mass to a harness.
  • Ventilated structure: the braided pattern allows airflow and helps prevent humidity build-up.

Specifications Explained

Diameter and expansion

The 8mm figure is the nominal resting diameter. With up to 150% expansion, the sleeve can open wider to accept connectors and then contract around the bundle, which helps it grip uneven harness shapes without extra ties.

Material and heat

Nylon and nylon/PET yarns give the sleeve a softer hand than stiffer PET-only braids. The -50°C to 150°C operating range covers most indoor electronics and many outdoor applications, while the 230 ± 5°C melting point and 100 ± 5°C tinting strength indicate the limits of the material under heat.

Flame rating

UL94V-2 indicates the sleeve is formulated to resist flame spread in electrical applications. It is a material rating, not a guarantee for every installation, so always follow the requirements of your specific project.

Compatibility and Requirements

This sleeve is intended for wire bundles, cables, hoses and tubing that fit within its expansion range. No tools, adhesives or fasteners are required to use it, though you may want cable ties or heat-shrink at the ends to secure the finish. It is not a sealed conduit and does not provide waterproofing or EMI shielding.

Typical Uses

  • Tidying wire harnesses in 3D printers and robotics assemblies
  • Protecting RC and drone wiring from abrasion and movement wear
  • Bundling cables inside enclosures and control panels
  • Covering hoses and tubing in light industrial setups
  • General cable management for electronics projects

Quick specs

Material
Nylon, Nylon/PET
Color
Black
Diameter (mm)
8
Expansion Ratio
Up to 150%
Melting Point (°C)
230 +/- 5
Tinting Strength (°C)
100 +/- 5
See all specifications