Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 120W desktop power supply that turns 100-240V AC into a stable 24V DC output at 5A through a 5.5 x 2.5mm DC plug. It suits CCTV cameras, LED lighting and other devices that need a steady 24V feed.

Key Highlights

  • 24V DC output at 5A, delivering up to 120W
  • Wide 100-240V AC input for global voltage standards
  • 5.5 x 2.5mm DC plug fits standard compatible devices
  • 88% minimum efficiency with low standby power draw
  • Overvoltage, overcurrent and short circuit protection built in
  • Flame-retardant UL94-V0 housing with tested strain relief

Ideal For

  • CCTV installers powering 24V surveillance cameras
  • Technicians maintaining LED lighting installations
  • Workshops bench-testing 24V DC equipment
  • Home users replacing a failed 24V adapter
  • AV and IT setups needing a stable 120W supply

Buying Tip

Measure your device's DC socket and confirm it needs 24V DC at 5A or less before ordering, since the 5.5 x 2.5mm plug and 24V output are fixed.

Elecvora expert review

Our verdict

A solid, well-protected 120W supply for 24V equipment with a common barrel plug. It is a sensible replacement or spare for CCTV and LED installations where the connector and voltage already match.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 120W output covers many 24V devices
  • Wide 100-240V AC input suits different regions
  • Overvoltage, overcurrent and short circuit protection
  • Flame-retardant UL94-V0 housing
  • Low ripple and noise of 240mVp-p or less

Cons

  • Fixed 5.5 x 2.5mm plug limits use to matching sockets
  • Single output only, so it cannot power several separate voltages
  • No DC cable length is stated in the specifications

Best for

Powering 24V CCTV cameras and LED lighting with a 5.5 x 2.5mm socket

Not ideal for

Devices needing a different voltage, plug size or more than 5A

Specifications

Item TypePower Adapter
Output Current (A)5
Output Power (W)120
Output Voltage24
Plug TypeDC Plug
Length (mm)140
Width (mm)65
Weight (g)553
Shipping Weight0.649 kg
Shipping Dimensions19 × 14 × 9 cm

What's in the box

  • 1 x Okeytech 24V 5A Desktop Power Adapter with 5.5 x 2.5mm DC plug

Frequently Asked Questions

What devices can this adapter power?
It suits devices that require 24V DC, draw 5A or less, and use a 5.5 x 2.5mm DC plug, such as compatible CCTV cameras and LED lighting.
Does the plug fit a 5.5 x 2.1mm socket?
No. This adapter has a 5.5 x 2.5mm plug with a 2.5mm inner pin, so check your device socket carefully before ordering.
Can I use it in different countries?
The input accepts 100-240V AC at 50/60Hz, covering common mains voltages. You may still need a plug adapter for the wall outlet.
How much power can it deliver?
It provides 24V DC at up to 5A, for a maximum output of 120W. Keep the combined draw of connected equipment within that limit.
What is included in the package?
The package contains one Okeytech 24V 5A Desktop Power Adapter with a 5.5 x 2.5mm DC plug.
How should I care for the adapter?
Keep it in a ventilated position, avoid covering it during use, and do not exceed the rated 5A output. Check the cable and plug regularly for damage.

Overview

The Okeytech 24V 5A Desktop Power Adapter is an AC-DC switching mode power supply built to feed equipment that runs on 24V DC. It accepts mains input from 100 to 240V AC at 50/60Hz and converts it to a regulated 24V DC output at up to 5A, giving a maximum output of 120W. The output leaves through a standard 5.5 x 2.5mm DC plug, a common connector on CCTV hardware and LED lighting.

This is a desktop-style unit measuring 140mm long and 65mm wide, weighing 553g. It is aimed at installers, technicians and home users who want a single dependable power source rather than a collection of mismatched adapters.

Key Features

  • Global input range: 100-240V AC, 50/60Hz, so the same adapter works across different mains voltages.
  • Stable 24V output: 5A continuous output with line regulation of ±2%.
  • Efficient operation: 88% minimum efficiency at full load and standby power below 210mW.
  • Clean power: ripple and noise of 240mVp-p or less.
  • Protection suite: overvoltage, overcurrent and short circuit protection.
  • Durable housing: flame-retardant casing rated UL94-V0, with strain relief tested for daily handling.

Specifications Explained

24V at 5A (120W) is the headline figure. Voltage must match what your device expects, and the 5A current ceiling means connected equipment should draw no more than 5A in total. Add up the draw of every device on the adapter before connecting them.

5.5 x 2.5mm DC plug describes the barrel connector: 5.5mm outer diameter and 2.5mm inner pin. Check both measurements on your device's socket, because a 5.5 x 2.1mm plug looks similar but will not seat correctly.

Efficiency and ripple affect heat, running cost and power quality. An 88% minimum efficiency rating keeps waste heat lower, while 240mVp-p ripple and noise is a controlled figure for sensitive electronics.

Environmental range covers operation from -20°C to 70°C and 90-95% relative humidity, which suits indoor installations and many sheltered outdoor cabinets.

Compatibility and Requirements

Use this adapter only with devices that require a 24V DC input, draw 5A or less, and accept a 5.5 x 2.5mm DC plug. Confirm the polarity marked on your device before connecting. The adapter needs a mains outlet within the input range of 100-240V AC, 50/60Hz.

Typical Uses

  • Powering CCTV cameras and surveillance equipment rated for 24V DC
  • Supplying LED lighting fixtures and strips with a compatible input
  • Bench testing and powering 24V devices in a workshop
  • Replacing a failed adapter in an existing installation

What's in the Box

1 x Okeytech 24V 5A Desktop Power Adapter with 5.5 x 2.5mm DC plug.

Quick specs

Item Type
Power Adapter
Output Current (A)
5
Output Power (W)
120
Output Voltage
24
Plug Type
DC Plug
Length (mm)
140
See all specifications