
1 / 3 · Click to enlarge
AI Summary
The Omron G2R-2-DC24 is a through-hole DPDT signal relay with a 24VDC non-latching coil and 5A contact rating. Its solder terminals and 1.1kohm coil make it ideal for reliable PCB switching.
Key Highlights
- DPDT contact configuration for two independent switching circuits
- 24VDC non-latching coil with 1.1kohm resistance
- 5A contact current rating at 250VAC or 30VDC
- Through-hole mounting with solder terminals for secure PCB installation
- Compact signal relay from the Omron G2R series
Ideal For
- Electronics designers building PCB-based control circuits
- Repair technicians replacing Omron G2R relays
- Automation and robotics hobbyists using 24VDC control
- Industrial maintenance teams servicing signal switching equipment
Buying Tip
Confirm your PCB footprint and coil supply are compatible with a 24VDC through-hole relay before ordering, and check that your load stays within 5A at 250VAC or 30VDC.
Elecvora expert review
Our verdict
The Omron G2R-2-DC24 is a dependable through-hole relay with a useful DPDT contact set and a standard 24VDC coil. It is a solid choice for PCB switching where a non-latching relay is required.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- DPDT contacts offer flexibility for two circuits
- 5A rating covers many low-to-medium power loads
- 24VDC coil is common in industrial control systems
- Through-hole mounting provides a secure connection
Cons
- Requires soldering for installation
- Non-latching design needs continuous coil power to stay energised
- No socket or accessory included
Best for
PCB designers and technicians needing a compact DPDT relay with a 24VDC coil
Not ideal for
Applications requiring latching operation or higher current ratings
Specifications
| Manufacturer | OMRON ELECTRONIC COMPONENTS |
|---|---|
| Coil Resistance(ohms) | 1.1kohm |
| Contact Current | 5A |
| Coil Voltage | 24VDC |
| Mounting Type | Through Hole |
| Contact Configuration | DPDT |
| Relay Terminals | Solder |
| Coil Type | Non Latching |
| Contact Voltage VAC | 250VAC |
| Bluetooth Version | Supports Bluetooth 5.1 dual mode function |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x Omron G2R-2-DC24 signal relay
Frequently Asked Questions
What is the coil voltage of this relay?
What contact configuration does the G2R-2-DC24 have?
What is the maximum load this relay can switch?
How is this relay mounted?
Is the relay latching or non-latching?
What is included in the package?
Overview
The Omron G2R-2-DC24 is a signal relay designed for through-hole PCB mounting. It combines a 24VDC non-latching coil with a double-pole double-throw (DPDT) contact set, allowing two separate circuits to be switched simultaneously from one control signal. With a contact rating of 5A at 250VAC or 30VDC and a coil resistance of 1.1kohm, this relay is suited to a wide range of low-to-medium power switching tasks in electronic equipment.
Key Features
- DPDT contact configuration: Two changeover contacts give you flexibility for routing signals or switching two loads independently.
- 24VDC coil: Operates directly from a 24V DC control line, with a coil resistance of 1.1kohm.
- Non-latching coil: The relay returns to its resting state when coil power is removed, simplifying control logic.
- 5A contact rating: Handles up to 5A at 250VAC or 30VDC, covering many common load types.
- Solder terminals: Through-hole pins allow permanent, vibration-resistant mounting on a PCB.
Specifications Explained
Coil voltage and resistance: The 24VDC coil with 1.1kohm resistance draws a modest current, making it compatible with many control circuits and driver stages. Contact configuration: DPDT means two poles, each with a normally open and normally closed contact, so you can switch two circuits at once or use one pole for switching and the other for feedback. Contact rating: The 5A rating at 250VAC or 30VDC indicates the maximum load the contacts are designed to handle; always stay within these limits for reliable operation. Mounting: Through-hole solder terminals provide a strong mechanical and electrical connection for PCB assembly.
Compatibility and Requirements
This relay requires a 24VDC coil supply and a PCB footprint that matches its through-hole pin layout. It is intended for solder mounting, so a soldering iron or reflow process is needed for installation. No additional socket or accessory is required. Ensure your control circuit can provide the coil voltage and that the switched load does not exceed 5A at 250VAC or 30VDC.
Typical Uses
- Signal routing and switching in industrial control panels
- PCB-based load control in instrumentation and test equipment
- Automation and robotics projects requiring a compact DPDT relay
- Repair and replacement in existing Omron G2R relay applications
- General electronics prototyping where a 24VDC coil is available
What's in the Box
One Omron G2R-2-DC24 signal relay.
Quick specs
- Manufacturer
- OMRON ELECTRONIC COMPONENTS
- Coil Resistance(ohms)
- 1.1kohm
- Contact Current
- 5A
- Coil Voltage
- 24VDC
- Mounting Type
- Through Hole
- Contact Configuration
- DPDT



















