Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 24V DC coil power relay with a single SPDT-CO contact set rated to 16A and a through-hole PCB footprint. Its cadmium-free silver alloy contacts and 15ms operate time make it a dependable changeover switch for control and power boards.

Key Highlights

  • 24V DC coil suited to standard 24V control rails
  • Single Form C SPDT-CO contact for changeover switching
  • 16A maximum switching current for moderate power loads
  • Through-hole PCB mounting for secure board assembly
  • Cadmium-free silver alloy contacts, ROHS compliant
  • Operates from -40 to +85 C in sheltered enclosures

Ideal For

  • Control and automation engineers designing 24V DC relay boards
  • Electronics technicians replacing a failed PCB power relay
  • Makers building changeover switching into custom equipment
  • Repair shops servicing ROHS-compliant industrial electronics
  • Students learning relay-driven load switching on 24V rails

Buying Tip

Check your board footprint and coil supply are 24V DC before ordering, and verify your load stays within the 16A contact rating and the stated switching voltage limits.

Elecvora expert review

Our verdict

A solid, no-nonsense changeover relay from a well-known manufacturer, with a 24V coil and 16A contacts that cover a lot of everyday switching work. It is a sensible pick when you need one reliable SPDT contact on a PCB and do not need socket-based replacement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 24V DC coil matches common control rails
  • 16A SPDT-CO contacts handle moderate loads
  • Cadmium-free silver alloy contacts and ROHS compliance
  • Through-hole mounting stays secure on the board
  • Wide -40 to +85 C operating range

Cons

  • Through-hole mounting means desoldering for replacement
  • Only one contact set, so no multi-pole switching
  • Coil current draw is not stated in the supplied data

Best for

24V control boards needing a single changeover power contact

Not ideal for

Designs requiring multi-pole switching or plug-in socket replacement

Specifications

ManufacturerOmron Electronics
Coil Voltage24V
Contact ConfigurationSPDT CO
Max. Switching Current(A)16A
Case/PackageThrough Hole
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x G2RL-1-E DC24 Omron power relay

Frequently Asked Questions

What coil voltage does this relay need?
It uses a 24V DC coil, so the control side must supply 24V DC across the coil terminals to operate the contacts.
What does SPDT-CO mean on this relay?
It has a single Form C changeover contact: one common terminal with a normally open and a normally closed contact, letting the relay select between two circuits.
How much current can the contacts switch?
The maximum switching current is 16A, with switching voltage maximums of 440V AC and 300V DC. Check the datasheet for full derating details before use.
Is this relay socket mounted or soldered?
It is a through-hole package intended for PCB mounting and soldering, not a plug-in socket type.
What is included with the purchase?
One G2RL-1-E DC24 Omron power relay is included. Images are for reference only, so consult the datasheet for complete specifications.
What temperature range can it operate in?
The relay is rated for operation from -40 to +85 C, which suits most enclosed equipment environments.

Overview

The Omron G2RL-1-E DC24 is a PCB-mount power relay designed for switching a single load through a changeover contact. A 24V DC coil drives one Form C (SPDT-CO) contact set, which means the relay can route a signal or supply to either of two paths and drop back to the normally closed state when the coil is released. The contact set is rated for a maximum switching current of 16A, making it suitable for moderate power loads rather than only low-level signals.

Omron builds the contacts from silver alloy without cadmium, and the part is ROHS compliant. The through-hole case keeps the relay firmly anchored to a board, which helps in equipment that sees vibration or repeated handling.

Key Features

  • 24V DC coil: matches common 24V control and interface rails.
  • SPDT-CO contact form: one changeover contact for two-path switching.
  • 16A maximum switching current: handles moderate loads directly.
  • Silver alloy contacts, cadmium-free: a considered material choice for ROHS builds.
  • Through-hole package: stable PCB mounting with straightforward soldering.
  • Fast response: 15ms operate time and 5ms release time.
  • Wide temperature range: rated for -40 to +85 C operation.

Specifications Explained

The coil voltage tells you what the control side needs: this relay expects 24V DC across the coil to pull in. The contact configuration, 1 Form C or SPDT-CO, gives you a common terminal plus normally open and normally closed contacts, so the relay can select between two circuits instead of simply making or breaking one.

Maximum switching current of 16A describes the contact rating limit for the load side. The switching voltage maximums of 440V AC and 300V DC indicate the upper voltage window the contacts are specified for, and the datasheet should be consulted for the full derating picture. Operate time of 15ms and release time of 5ms describe how quickly the contacts move after the coil is energised or de-energised. The -40 to +85 C range covers operation in most enclosed equipment environments.

Compatibility and Requirements

This relay requires a 24V DC coil supply and a PCB layout that accepts a through-hole relay footprint. Because the case is through-hole rather than plug-in socket mounted, plan for soldering or a compatible board design. Confirm your load current and voltage against the 16A contact rating and the stated switching voltage maximums before committing the design.

Typical Uses

  • Industrial control and automation boards using a 24V rail
  • Power switching and load selection in equipment enclosures
  • Signal routing where a changeover contact is needed
  • Interface and driver boards in prototyping and repair work
  • General-purpose PCB relay replacement in ROHS-compliant products

What's in the Box

One G2RL-1-E DC24 Omron power relay. Product images are for reference only; refer to the datasheet in the attachments for the complete specification set.

Quick specs

Manufacturer
Omron Electronics
Coil Voltage
24V
Contact Configuration
SPDT CO
Max. Switching Current(A)
16A
Case/Package
Through Hole
Shipping Weight
0.001 kg
See all specifications