Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 30 cm replacement cable has a 6-pin JST XH female connector for the Orange OE-37 encoder and tinned open ends for easy wiring. It saves you from soldering directly to the encoder and keeps your connections neat.

Key Highlights

  • 6-pin JST XH female connector with 1.5 mm pitch
  • 30 cm length for flexible routing in projects
  • 26AWG ribbon wire for reliable signal transfer
  • Tinned open ends for easy soldering or breadboarding
  • Solder-free connection at the encoder side
  • Lightweight at just 8 g

Ideal For

  • Robotics hobbyists building custom motor feedback systems
  • CNC and 3D printer enthusiasts upgrading or repairing encoders
  • Electronics students learning about closed-loop control
  • Makers prototyping with the Orange OE-37 encoder
  • Anyone needing a spare or replacement cable for their OE-37

Buying Tip

Check that your encoder has a 6-pin JST XH male header before ordering, as the male connector is not included.

Elecvora expert review

Our verdict

This replacement cable is a straightforward, well-made accessory that makes connecting the OE-37 encoder much easier. It eliminates the need to solder directly to the encoder and provides a secure, reliable link.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Solder-free connection at the encoder end
  • Standard JST XH connector for easy sourcing
  • Adequate 30 cm length for most projects
  • Tinned ends simplify wiring

Cons

  • Male header not included, so check your encoder
  • Only one cable per package

Best for

Makers and engineers using the Orange OE-37 encoder who want a plug-and-play cable solution.

Not ideal for

Those who need a complete encoder assembly or a cable with a different connector type.

Specifications

Model No. / NameOE-37
Connector Type6 pin JST HX (Female)
No. of Pins6
Wire Size (AWG)26
Cable Length30
Weight (g)8
Shipping Weight0.012 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 1 x Replacement cable for Orange OE-37 Hall Effect Two Channel Magnetic Encoder

Frequently Asked Questions

Does this cable include the male connector for the encoder?
No, the package includes only the replacement cable with a female JST XH connector. Your encoder must already have a 6-pin JST XH male header.
What is the length of the cable?
The cable is 30 cm long, providing ample length for most projects.
What is the wire gauge?
The cable uses 26AWG ribbon wire, which is flexible and suitable for signal connections.
Can I use this cable with other encoders?
It is designed for the Orange OE-37 encoder, but it may work with other devices that use a 6-pin JST XH male header and the same pinout.
Are the open ends pre-tinned?
Yes, the open ends are tinned, making them ready for soldering or insertion into breadboards.
What is the pin pitch of the connector?
The JST XH connector has a 1.5 mm pitch between pins.

Overview

The Orange OE-37 Replacement Cable is designed specifically for the Orange OE-37 Hall Effect Two Channel Magnetic Encoder. It provides a convenient way to connect your encoder to your controller or development board without soldering directly to the encoder PCB. The cable features a 6-pin JST XH female connector on one end and tinned open ends on the other, with a 30 cm length of 26AWG ribbon wire in between. This replacement cable is ideal for repairs, extensions, or custom builds where a reliable connection is essential.

Key Features

  • 6-pin JST XH female connector – mates with the 6-pin male header on the encoder PCB (male header not included).
  • 30 cm cable length – gives you enough slack to route the cable neatly in your project.
  • 26AWG ribbon wire – flexible and easy to work with, suitable for signal and power connections.
  • Tinned open ends – ready for soldering to pads, headers, or breadboard pins.
  • Solder-free at encoder side – simply plug the connector onto the encoder header.
  • Lightweight – just 8 g, adding negligible weight to your setup.

Specifications Explained

Connector Type: The 6-pin JST XH female connector is a common choice for encoder connections. It has a 1.5 mm pitch between pins, which is standard for JST XH series. This connector provides a secure locking mechanism when mated with the corresponding male header, reducing the risk of accidental disconnection.

Wire Size: The 26AWG wire is thick enough to carry the required current for the encoder while remaining flexible and easy to route. It is also durable enough for repeated handling.

Cable Length: At 30 cm, the cable offers ample length for most small to medium projects, allowing you to position the encoder and controller without strain.

Open Ends: The tinned ends make it simple to solder the cable to your controller board or insert it into a breadboard or terminal block. The tinning prevents fraying and ensures a good electrical connection.

Compatibility and Requirements

This cable is compatible with the Orange OE-37 Hall Effect Two Channel Magnetic Encoder. The encoder must have a 6-pin JST XH male header soldered to its PCB to accept this cable. Note: The male connector is not included; you will need to ensure your encoder has the mating header. The open ends can be connected to any suitable controller or development board with matching pinout.

Typical Uses

This replacement cable is ideal for:

  • Repairing a damaged or lost cable on your OE-37 encoder.
  • Extending the reach of your encoder in robotic arms or mobile robots.
  • Connecting the encoder to a breadboard for prototyping.
  • Custom motion-control projects such as CNC machines or camera sliders.

What's in the Box

1 x Replacement cable for Orange OE-37 Hall Effect Two Channel Magnetic Encoder (30 cm, 6-pin JST XH female to tinned open ends).

Quick specs

Model No. / Name
OE-37
Connector Type
6 pin JST HX (Female)
No. of Pins
6
Wire Size (AWG)
26
Cable Length
30
Weight (g)
8
See all specifications