Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Particle, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Kit; batteries required Exclude; weight (g) 125gm.

Key Highlights

  • Item Type: Kit
  • Batteries Required: Exclude
  • Weight (g): 125gm

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeKit
Batteries RequiredExclude
Weight (g)125gm
Shipping Weight0.02 kg
Shipping Dimensions15 × 9 × 3 cm

Overview

The Particle Argon IoT Development Kit, made by Particle, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Kit
  • Batteries Required: Exclude
  • Weight (g): 125gm (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 15 × 9 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Argon is a powerful Wi-Fi enabled development kit that can act as a standalone Wi-Fi endpoint. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. The Argon is great for connecting projects or as a gateway to connect an entire group of local endpoints. It's everything you love about the Photon, with more features like Bluetooth. Contents:
  • Argon development board
  • Mini breadboard
  • 2.4GHz flex antenna (ANT-FLXV2)
  • USB cable
  • Starter project includes two resistors (220 ohm), one red LED, and one photodiode
Specs:
  • Espressif ESP32-D0WD 2.4G Wi-Fi coprocessorOn-board 4MB flash for ESP32802.11 b/g/n support802.11 n (2.4 GHz), up to 150 Mbps
  • Nordic Semiconductor nRF52840 SoCARM Cortex-M4F 32-bit processor @ 64MHz1MB flash, 256KB RAMIEEE 802.15.4-2006: 250 KbpsBluetooth 5: 2 Mbps, 1 Mbps, 500 Kbps, 125 KbpsSupports DSP instructions, HW accelerated Floating Point Unit (FPU) calculationsARM TrustZone CryptoCell-310 Cryptographic and security moduleUp to +8 dBm TX power (down to -20 dBm in 4 dB steps)NFC-A tag
  • On-board additional 4MB SPI flash
  • 20 mixed signal GPIO (6 x Analog, 8 x PWM), UART, I2C, SPI
  • Micro USB 2.0 full speed (12 Mbps)
  • Integrated Li-Po charging and battery connector
  • JTAG (SWD) Connector
  • RGB status LED
  • Reset and Mode buttons
  • On-board 2.4GHz PCB antenna for Thread/BLE (does not support Wi-Fi)
  • Two U.FL connectors for external antennas (one for Thread/BLE, another for Wi-Fi)
  • Meets the Feather specification in dimensions and pinout
  • FCC, CE, and IC certified
  • RoHS compliant (lead-free)

Package Includes:

1 x Particle Argon IoT Development Kit

Quick specs

Item Type
Kit
Batteries Required
Exclude
Weight (g)
125gm
Shipping Weight
0.02 kg
Shipping Dimensions
15 × 9 × 3 cm
See all specifications