
1 / 6 · Click to enlarge
AI Summary
A compact plastic battery holder for three AA cells in series, giving a 4.5V output through 15cm tinned leads. The built-in on/off switch and sliding cover make it easy to control and protect your battery-powered project.
Key Highlights
- Holds three AA batteries in series for 4.5V output
- Built-in on/off switch for convenient power control
- Sliding plastic cover secured with a fixing screw
- 15cm leads with 5mm tinned ends for easy soldering
- Compact 68 x 48 x 18mm case weighs only 24g
- Simple to install in project boxes and enclosures
Ideal For
- DIY electronics hobbyists building portable projects
- Students and educators creating battery-powered kits
- Makers needing a switchable 4.5V supply
- Anyone replacing a worn battery holder in a small device
Buying Tip
Check that your project expects a 4.5V nominal supply and that you have three AA batteries on hand, as they are not included.
Elecvora expert review
Our verdict
A practical, no-frills battery holder that adds a useful switch and protective cover to a standard 3x AA series pack. It is well suited to hobby projects where a compact 4.5V supply is needed.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated on/off switch saves wiring a separate switch
- Cover and screw keep batteries secure
- Tinned leads are ready for soldering
- Compact and lightweight
Cons
- Batteries are not included
- Leads require soldering or additional connectors
- No mounting holes or adhesive provided
Best for
DIY electronics and educational projects needing a switchable 4.5V battery pack
Not ideal for
Applications requiring higher voltage or rechargeable battery management
Specifications
| Item Type | Battery Holder |
|---|---|
| Compatibility | AA Battery |
| Material | Plastic |
| Internal Connections | Series |
| Output Voltage | 4.5 |
| ON/OFF Switch | Yes |
| Cable Length | 15 |
| Color | Black |
| Dimensions (L x W x H) mm | 68x48x18 |
| Weight (g) | 24 |
| Shipping Weight | 0.027 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x Plastic Covered Battery Cell Holder For 3 X AA Battery with On/Off Switch
Frequently Asked Questions
What type of batteries does this holder take?
What is the output voltage?
Does it have an on/off switch?
How long are the leads and are they ready to use?
Is the cover removable?
What are the dimensions and weight?
Overview
This plastic-covered battery cell holder is designed for projects that need a reliable 4.5V supply from three AA batteries. The internal series connection combines the cells to deliver the stated output voltage, while the integrated on/off switch lets you power your circuit on or off without handling the batteries. A sliding cover, secured with a small screw, keeps the cells in place and protected during use. The holder comes with 15cm leads, the last 5mm of which are tinned, making them straightforward to solder to terminals or connect to a battery clip.
Key Features
- Three-cell AA holder: Accepts three AA batteries in a series configuration.
- On/off switch: Built-in switch for controlling power to your project.
- Protective cover: Sliding plastic cover with fixing screw keeps batteries organised and shielded.
- Ready-to-solder leads: 15cm leads with tinned ends simplify wiring.
- Compact and lightweight: Measures 68 x 48 x 18mm and weighs 24g.
Specifications Explained
Compatibility: The holder is sized for standard AA batteries. It does not include batteries, so you will need to supply your own.
Internal connections: The cells are wired in series, which means the voltages add together. With three AA cells, the nominal output is 4.5V, as listed.
Output voltage: The stated 4.5V is the nominal voltage for three alkaline or similar AA cells in series. Actual voltage will depend on the battery chemistry and charge state.
Switch: The on/off switch is integrated into the holder, allowing you to isolate the battery pack from your circuit without removing the cover.
Cable length: The 15cm leads give you enough length to route to a nearby circuit board or connector. The tinned ends are ready for soldering.
Dimensions and weight: At 68 x 48 x 18mm and 24g, the holder is compact enough for small enclosures and adds minimal weight to portable projects.
Compatibility and Requirements
This holder is compatible with AA batteries only. It requires three AA cells (not included) to operate. The series connection provides a 4.5V nominal output. The leads are bare tinned wire, so you will need basic soldering tools or a suitable connector to attach them to your device. The holder does not include a battery clip or plug.
Typical Uses
Use this holder in DIY electronics projects, breadboard prototypes, small robots, portable sensors, LED circuits, educational kits and any device that needs a compact 4.5V battery supply. The switch is especially handy for projects where you want to leave the batteries installed but cut power between uses.
What's in the Box
1 x Plastic Covered Battery Cell Holder For 3 X AA Battery with On/Off Switch. Batteries are not included.
Quick specs
- Item Type
- Battery Holder
- Compatibility
- AA Battery
- Material
- Plastic
- Internal Connections
- Series
- Output Voltage
- 4.5
- ON/OFF Switch
- Yes














