Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This test & measuring module is a good fit for makers, students and electronics hobbyists.

Key Highlights

  • Small and easy to carry or mount

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The Portable Voltage Current Signal Generator 10V 22mA Output for PLC & Instrument Calibration is listed in our test & measuring module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Features:
- Power supply: External DC15-30V, USB-5V, with emergency AC transformer [AC12-24V] support.  (Only version B is equipped with a rechargeable lithium battery)
- One-key switching between voltage and current regulation modes with independent wiring and simultaneous output capability.
- Current output supports 2, 3, 4-wire systems, fully compatible with active devices.
- Short-circuit protection on outputs, non-polarized power supply connection, and DC bridge isolation protection.
- Multiple output ranges: ±10V/±5V/0-10V/2-10V/0-5V/1-5V/0-3.3V/0-2.5V/0-1V/-10V-0V for voltage; 0-20mA/0-22mA/4-20mA for current.
- Multiple display modes: actual value, percentage (0-100.0%), and frequency (50Hz, 1-1500Hz).
- Dual adjustment modes: coarse and fine tuning with configurable step values.
- Lithium battery protection: overcurrent protection during charge/discharge, automatic charging management, power indicator, and voltage display.
- 360-degree encoder knob for stepless adjustment, long-lasting and unaffected by temperature/humidity.
- High-brightness 4-digit display with two decimal places, output calibration capability.
- High-grade aluminum alloy knob, plated buttons, aesthetic shell, comfortable grip.
- 2mm banana jacks for easy installation, compact and portable design.

Specification:
- Working Voltage: DC24V (Range: DC15V-30V)
- Working Current: 1W
- USB Input: microUSB 5V, 0.2A (not charging) / 1A (charging)
- Voltage Output: 0-10V adjustable, accuracy ±0.01V, max current 20mA, short-circuit protection
- Current Output: 0-22mA adjustable, accuracy ±0.01mA, sampling resistor 10-500Ω, short-circuit protection
- Display: 4-digit with two decimal places
- Encoder: 20 pulses per rotation
- Operating Temperature: 0°C to 50°C
- Operating Humidity: 0 to 95% RH
- Storage Temperature: -40°C to 85°C

Package Included:
1 x Unit
1 x Set of Accessories



Product Safety Information