
1 / 3 · Click to enlarge
AI Summary
A Class A PT100 RTD probe with a 4 x 30 mm stainless steel body and 1.5 m shielded FEP cable for measuring -50°C to +200°C in air or liquids. Its 4-wire design and fast water response make repeatable readings easier to achieve.
Key Highlights
- Class A PT100 platinum element with 100 ohms nominal resistance at 0°C
- 4 x 30 mm SUS304 stainless steel probe for air and liquid contact
- 1.5 m FEP cable with stainless steel shielding and 4-wire wiring
- Measures from -50°C to +200°C with fast response in water
- Handles vibration to 40g and shock to 100g in demanding settings
- Insulation resistance above 100 MΩ at 20°C for stable signals
Ideal For
- Automation engineers monitoring process lines
- Laboratory technicians measuring baths and samples
- HVAC and facilities teams checking duct temperatures
- Makers building temperature logging systems
- Maintenance crews testing industrial equipment
Buying Tip
Confirm your reader or transmitter accepts a 4-wire PT100 input and can supply a measuring current between 0.3 and 1.0 mA before ordering.
Elecvora expert review
Our verdict
A compact, well-shielded Class A PT100 probe that covers a wide temperature span and responds quickly in liquids. It is a sensible choice for anyone who already has a compatible 4-wire RTD reader and needs dependable readings.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Class A tolerance for closer readings
- Fast response in water
- Shielded FEP cable for wet or noisy settings
- Wide -50°C to +200°C range
- Small 4 x 30 mm probe fits tight spaces
Cons
- Requires a separate RTD reader or transmitter
- No connector or terminal block included
- 4-wire wiring needs a compatible input
Best for
Engineers and technicians with a 4-wire PT100 reader who need a compact, shielded probe
Not ideal for
Users wanting a self-contained thermometer or a plug-and-play display unit
Specifications
| Shipping Weight | 0.056 kg |
|---|---|
| Shipping Dimensions | 11 × 11 × 3 cm |
What's in the box
- 1 x PT100 A-class Temperature Sensor 4*30mm 1.5M
Frequently Asked Questions
Does this sensor work without a separate reader?
Can I use it in water or other liquids?
What temperature range does it cover?
How many wires does the cable have?
What is included in the package?
How should I care for the probe and cable?
Overview
The Generic PT100 A-Class Temperature Sensor is a resistance temperature detector built around a platinum element with a nominal 100 ohm resistance at 0°C. It follows the DIN EN 60751 Class A tolerance, which keeps readings close to the true temperature across the working range. The element is housed in a 4 mm diameter, 30 mm long SUS304 stainless steel probe, giving it a slim profile for ducts, pipes, baths, and small vessels.
A 1.5 m cable connects the probe to your reading instrument. The cable uses FEP insulation, a stainless steel shield, and an FEP outer sheath, and it is wired in a 4-wire configuration to help cancel lead resistance in the measurement circuit.
Key Features
- Platinum PT100 sensing element with Class A accuracy
- SUS304 stainless steel probe, 4 mm x 30 mm
- FEP-insulated, shielded cable with 1.5 m length
- 4-wire connection for reduced lead-resistance error
- Temperature range of -50°C to +200°C
- Vibration resistance to 40g and shock resistance to 100g
Specifications Explained
Accuracy and element
Class A (F0.15) describes the tolerance band of the platinum element, and the 3850 ppm/K temperature coefficient is the standard platinum curve. Together these matter if you compare readings across sensors or log data over time.
Probe and cable
The 4 mm x 30 mm stainless steel body responds quickly because of its small mass. The cable's FEP insulation and stainless steel shield protect the signal in wet, oily, or electrically noisy areas.
Response and limits
Response time is t0.5 = 0.06 s and t0.9 = 0.20 s in water, while in air it is t0.5 = 3.0 s and t0.9 = 13.0 s. Insulation resistance is above 100 MΩ at 20°C, and self-heating is 0.4 K/mW at 0°C, so keep measuring current within the stated 0.3–1.0 mA range.
Compatibility and Requirements
This is a passive resistive sensor, so it needs a separate RTD reader, transmitter, or controller designed for 4-wire PT100 inputs. No reading electronics are included. Use it only within -50°C to +200°C.
Typical Uses
- Laboratory baths and sample temperature checks
- Industrial process and pipeline monitoring
- HVAC duct and air temperature measurement
- Automation and control panel sensing
- Equipment testing and calibration reference work
What's in the Box
1 x PT100 A-class Temperature Sensor 4*30mm 1.5M













