Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12V DC micro linear actuator with a 50 mm stroke, 50 N of force and built-in limit switches. Its 18 mm wide, 58 g body suits tight robotics and automation builds where space is limited.

Key Highlights

  • 50 mm stroke with 50 N of push and pull force
  • 12V DC high-torque gear motor for smooth motion
  • Built-in limit switches stop travel at each end
  • Slim 18 mm wide body and 58 g weight
  • Around 14.6 mm per second no-load speed
  • Supplied with a connection cable for wiring

Ideal For

  • Robotics builders making compact grippers and linear slides
  • Automation hobbyists working on small hatches and dampers
  • Engineering students prototyping controlled linear motion
  • Makers integrating short-stroke movement into tight enclosures
  • Prototype developers needing a light 12V DC actuator

Buying Tip

Confirm that your mechanism stays within the 50 N force limit and that your 12V supply can handle the motor's startup current before mounting the actuator.

Elecvora expert review

Our verdict

A sensible small actuator for light-duty projects where space is tight and the load is modest. It offers useful travel and force for its size, but it is not a heavy-duty component and needs a proper 12V control setup.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 18 mm wide, 58 g body fits tight builds
  • 50 mm stroke with 50 N force suits light mechanisms
  • Built-in limit switches simplify end-of-travel control
  • Straightforward 12V DC operation

Cons

  • Requires a separate 12V supply and reversing control
  • 50 N limit rules out heavier loads
  • No mounting hardware included

Best for

Compact robotics and small automation projects with light loads

Not ideal for

Heavy lifting or high-force industrial pushing tasks

Specifications

Motor TypeHigh Torque DC Gear Motor
Stroke Length (mm)50
Nominal Voltage (V)12
Operating Temperature (°C)10 to 80
Width (mm)18
Speed at No Load (mm/Sec)14.6
Force (N)50
ControlS - Limit Switch
Length (mm)120
Weight (g)58
Shipping Weight0.121 kg
Shipping Dimensions16 × 11 × 7 cm

What's in the box

  • 1 x Quintrans Micro Linear Actuator 12V DC, 50 mm stroke
  • 1 x connection cable

Frequently Asked Questions

What voltage does this actuator need?
It is designed for a nominal 12V DC supply. Make sure your power source can provide the current the motor needs, especially at startup.
How far does the rod travel?
The stroke length is 50 mm, so the rod extends and retracts over that distance.
Does it have limit switches?
Yes, the unit is specified with built-in limit switches that stop travel at the ends of the stroke.
How much force can it push or pull?
The rated force is 50 N. Keep loads within this figure and apply them along the rod axis to avoid side loading.
What is included with the actuator?
The package contains one Quintrans micro linear actuator and one connection cable. A power supply and controller are not included.
How should I look after it?
Keep the unit within its stated 10 to 80 degrees Celsius operating range, avoid dust and water ingress, and do not exceed the force rating.

Overview

The Quintrans Micro Linear Actuator is a compact electric motion unit built around a high-torque DC gear motor. It converts rotary motor output into straight-line push and pull movement over a 50 mm stroke, making it useful wherever a small mechanism needs to extend and retract under control. Because the body is only 18 mm wide and 120 mm long, it can be mounted in places where a standard-size actuator would not fit.

This version runs on 12V DC and is rated for 50 N of force. It is intended for light-duty positioning work in robotics, small automation setups and embedded systems rather than heavy lifting.

Key Features

  • Compact micro format: an 18 mm wide, 120 mm long body that suits tight assemblies.
  • 50 mm stroke: enough travel for small hatches, levers, clamps and positioning stages.
  • 50 N force: handles light loads such as small panels, brackets and push mechanisms.
  • 12V DC gear motor: a high-torque DC gear motor drives the stroke.
  • Limit switches: end-of-travel switches help stop the motor at the limits of movement.
  • Light weight: at 58 g, it adds little mass to a moving frame or handheld build.

Specifications Explained

Stroke and speed: the 50 mm stroke sets how far the rod travels, while the no-load speed of about 14.6 mm per second gives a rough idea of travel time. Under load, movement will be slower than the no-load figure.

Force rating: 50 N is a light-duty figure. Keep the load within this limit and avoid side loads on the rod, which can shorten the life of the mechanism.

Voltage: the actuator is designed for 12V DC. Use a supply that matches this nominal voltage and can deliver the current the motor draws during startup.

Temperature range: the stated operating range is 10 to 80 degrees Celsius, so keep the unit within these conditions.

Compatibility and Requirements

The actuator needs a 12V DC power source and a suitable reversing control method to extend and retract the rod. The built-in limit switches are part of the unit's control arrangement. No controller, power supply or mounting hardware is included beyond the actuator and cable, so plan your wiring and fixings before installation.

Typical Uses

  • Small robotics joints, grippers and linear slides
  • Automation projects such as vents, dampers and small hatches
  • Embedded systems and prototype mechanisms
  • Model and hobby builds needing short controlled travel
  • Educational and laboratory demonstrations of linear motion

What's in the Box

  • 1 x Quintrans Micro Linear Actuator 12V DC, 50 mm stroke
  • 1 x connection cable

Quick specs

Motor Type
High Torque DC Gear Motor
Stroke Length (mm)
50
Nominal Voltage (V)
12
Operating Temperature (°C)
10 to 80
Width (mm)
18
Speed at No Load (mm/Sec)
14.6
See all specifications