At a glance
This sensor & detector module is a good fit for makers, students and electronics hobbyists. Main specs: model R503; type Capacitive Fingerprint Module; interface UART(TTL). Check that your power source supplies DC 3.3V before connecting it.
Key Highlights
- Model: R503
- Type: Capacitive Fingerprint Module
- Interface: UART(TTL)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model | R503 |
|---|---|
| Type | Capacitive Fingerprint Module |
| Interface | UART(TTL) |
| Resolution | 508 DPI |
| Voltage | DC 3.3V |
| Fingerprint Capacity | 200 |
| Sensing array | 192*192 pixel |
| Working current | 20mA |
| Standby current | Typical touch standby voltage: 3.3V, Average current: 2uA |
| Fingerprint module external size | Diameter 28 (mm) |
| Fingerprint module inner size | Diameter 23.5 (mm) |
| Fingerprint module height | 19 (mm) |
| Effective collection area | Diameter 15.5 (mm) |
| Connector | MX1.0-6Pin |
| LED Control | YES |
| LED Color | Blue and Red |
| Scanning Speed | < 0.2 second |
| Verification Speed | < 0.3 second |
| Matching Method | 1:1; 1:N |
| FRR | ≤1% |
| FAR | ≤0.001% |
| Work environment | -20C ---60C |
| Work Humidity | 10-85% |
| Anti-static capacity | 15KV |
| Abrasive resistance intensity | 1 million times |
| Communications baud rate (UART) | (9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps) |
| Model number | R503 |
Overview
The R503 Capacitive Fingerprint Module Sensor Scanner Circular Round Two-Color Ring Indicator LED Control DC3.3V MX1.0-6pin is listed in our sensor & detector module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model: R503
- Type: Capacitive Fingerprint Module
- Interface: UART(TTL) (confirm your cable or board uses the same connector)
- Resolution: 508 DPI
- Voltage: DC 3.3V (match this to your power supply; too high a voltage can damage the part)
- Fingerprint Capacity: 200
- Sensing array: 192*192 pixel
- Working current: 20mA (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Quick specs
- Model
- R503
- Type
- Capacitive Fingerprint Module
- Interface
- UART(TTL)
- Resolution
- 508 DPI
- Voltage
- DC 3.3V
- Fingerprint Capacity
- 200
Cheaper Alternatives

5Pcs KY-022 Infrared IR Receiver Sensor Module For
Geekcreit® W1209 DC 12V -50 to +110 Temperature Sensor Control Switch Thermostat Thermometer
HX711 24bit AD Module + 1kg Aluminum Alloy Scale Weighing Sensor Load Cell Kit Geekcreit for Arduino - products that work with official Arduino boards










