Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The RadioLink R9DS is a 9-channel 2.4GHz receiver with DSSS/FHSS for interference-free control and up to 3.4km range. It supports PWM and SBUS output, works with AT9/AT10 series radios, and enables telemetry feedback.

Key Highlights

  • 9-channel 2.4GHz receiver for drones, bots, and RC models
  • DSSS and FHSS protocols for strong anti-interference performance
  • Control range up to 2.1 miles (3.4km) in open areas
  • PWM and SBUS signal output for flexible connectivity
  • Dual-way communication supports flight data telemetry
  • Compatible with RadioLink AT9/AT9S/AT9S Pro/AT10/AT10II

Ideal For

  • FPV pilots building long-range quads
  • RC airplane hobbyists needing 9 channels
  • Robot builders using RadioLink transmitters
  • Beginners upgrading to a reliable receiver
  • Modelers who want telemetry feedback

Buying Tip

Before buying, confirm that your RadioLink transmitter is one of the compatible models (AT9/AT9S/AT9S Pro/AT10/AT10II) and that you have a suitable power source within 3.6–12V.

Elecvora expert review

Our verdict

The RadioLink R9DS is a solid, no-frills receiver that delivers reliable long-range control and telemetry for RadioLink users. Its wide voltage range and dual output modes make it adaptable to many builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Long control range up to 3.4km
  • DSSS/FHSS for interference resistance
  • Supports both PWM and SBUS
  • Wide 3.6–12V operating voltage
  • Dual-way telemetry capability

Cons

  • Only compatible with RadioLink AT9/AT10 series
  • Requires soldering or connectors for installation
  • Telemetry features depend on transmitter support

Best for

RadioLink AT9/AT10 users needing a reliable 9-channel receiver

Not ideal for

Pilots using other brand transmitters

Specifications

Item TypeReceiver
No. of Channels9
Frequency (GHz)2.4
Operating Voltage (V)3.6-12
Operating Current (mA)8-45mA@5V
ColorBlack
Shipping Weight0.012 kg
Shipping Dimensions8 × 8 × 2 cm

What's in the box

  • 1 x Radiolink R9DS receiver

Frequently Asked Questions

What transmitters is the R9DS compatible with?
The R9DS works with RadioLink AT9, AT9S, AT9S Pro, AT10, and AT10II transmitters.
What is the operating voltage range?
The receiver accepts 3.6–12V, so it can be powered from a 1S–3S LiPo or a BEC within that range.
Does it support SBUS?
Yes, the R9DS can output both PWM and SBUS signals, selectable based on your setup.
What is included in the package?
The package includes one Radiolink R9DS receiver. Cables and manuals are not mentioned.
Can I use it for telemetry?
Yes, it supports dual-way communication, allowing flight data to be sent back to compatible transmitters.
How should I care for the receiver?
Keep it dry, avoid physical stress on antennas, and ensure connections are secure. Do not exceed 12V input.

Overview

The RadioLink R9DS is a compact 9-channel 2.4GHz receiver built for RC hobbyists who need dependable control. It employs DSSS (Direct Sequence Spread Spectrum) and FHSS (Frequency Hopping Spread Spectrum) protocols to maintain a stable link even in crowded 2.4GHz environments. With a control range of up to 2.1 miles (3.4km), it is suitable for long-range FPV, large flying fields, and ground vehicles that venture far from the pilot.

Designed for use with RadioLink AT9, AT9S, AT9S Pro, AT10, and AT10II transmitters, the R9DS offers both PWM and SBUS output options. This makes it easy to connect to a wide range of flight controllers, servos, and robot electronics. The receiver operates on 3.6–12V and draws only 8–45mA at 5V, so it can be powered directly from a receiver pack or a BEC.

Key Features

  • 9 control channels: Enough for ailerons, elevator, rudder, throttle, and auxiliary functions like flaps, landing gear, or camera triggers.
  • DSSS and FHSS: These spread-spectrum techniques reduce signal dropouts and resist interference from other 2.4GHz devices.
  • Dual-way communication: The receiver can send flight data back to the transmitter, enabling telemetry for voltage, RSSI, and other sensors (when supported by the radio).
  • PWM and SBUS output: Choose traditional PWM for individual servos or SBUS for a single-cable connection to a flight controller.
  • High voltage support: The wide 3.6–12V input range accommodates high-voltage servos and direct battery connection without extra regulators.
  • Compact and lightweight: The black receiver is easy to mount in tight spaces, and its low current draw helps preserve battery life.

Specifications Explained

Channels: Nine channels give you room for primary flight controls plus auxiliary functions. This is ideal for scale models, multirotors with gimbals, and robots with multiple actuators.

Frequency: The 2.4GHz band is widely used for RC control, offering a good balance of range and antenna size. The R9DS uses DSSS and FHSS to operate reliably in this band.

Operating voltage: The 3.6–12V range means you can power the receiver from a 1S–3S LiPo directly or from a BEC. Always check that your servos and other connected devices can handle the voltage you supply.

Operating current: At 5V, the receiver draws 8–45mA, which is negligible for most batteries. This low consumption helps maximize flight time.

Range: The stated control range of up to 2.1 miles (3.4km) is achievable in open areas with clear line of sight. Obstacles, weather, and antenna placement can reduce range.

Compatibility and Requirements

The R9DS is compatible with RadioLink AT9, AT9S, AT9S Pro, AT10, and AT10II transmitters. It supports both PWM and SBUS signal output, so it can connect to a variety of flight controllers and servo setups. Note that the actual product may vary in terms of version printed on it. No additional modules are required for basic operation, but you will need a suitable power source (3.6–12V) and a way to mount the receiver securely.

Typical Uses

  • FPV multirotors and drones requiring reliable long-range control
  • RC airplanes and gliders with multiple control surfaces
  • Ground robots and bots needing precise, interference-free command
  • Any model compatible with RadioLink AT9/AT10 series radios

What's in the Box

1 x Radiolink R9DS receiver.

Quick specs

Item Type
Receiver
No. of Channels
9
Frequency (GHz)
2.4
Operating Voltage (V)
3.6-12
Operating Current (mA)
8-45mA@5V
Color
Black
See all specifications