
1 / 5 · Click to enlarge
AI Summary
A rain-sensing board paired with a 12V relay module that detects water droplets and switches an external load. The sensitivity potentiometer lets you set the trigger point for your own automation or monitoring project.
Key Highlights
- Rain-sensing FR-04 double-sided board with nickel-plated surface
- LM393 comparator delivers a clean, TTL-compatible output signal
- 12V relay rated 250V 10A AC and 30V 10A DC
- Onboard potentiometer for adjusting rain sensitivity
- Power and output LED indicators for quick status checks
- Compact 55 x 40 mm sensor board with mounting bolt hole
Ideal For
- Makers building weather monitoring and rainfall detection projects
- Gardeners automating irrigation or plant watering
- Students learning about sensors, comparators and relays
- Automation hobbyists needing moisture-triggered switching
- DIY builders adding rain-responsive control to covers or vents
Buying Tip
Check that your project can supply 12V to the module and that the load you plan to switch stays within the relay's 250V 10A AC or 30V 10A DC contact rating.
Elecvora expert review
Our verdict
A straightforward rain-detection module that pairs a nickel-plated sensing board with a useful 12V relay, making it easy to add moisture-triggered switching to small projects. It is best treated as a building block rather than a finished weather station.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Relay output allows direct control of external loads
- Adjustable sensitivity via onboard potentiometer
- Clean TTL-compatible comparator output
- Oxidation-resistant nickel-plated sensing board
- Compact size with mounting hole
Cons
- Requires a separate 12V power supply
- Relay contact ratings limit the loads it can switch
- Sensing board needs periodic cleaning for consistent readings
Best for
Makers and hobbyists adding rain-triggered switching to small automation projects
Not ideal for
Users needing a fully assembled, weatherproof outdoor monitoring station
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Rain Detection Sensor |
| Voltage Rating | 12 |
| PCB Dimension (lxbxh)mm | 55 x 40 sensor |
| Relay Capacity | 250V 10A (AC) 30V 10A (DC) |
| Quiescent Current | 5-12mA |
| Length (mm) | 50 |
| Width (mm) | 26 |
| Weight (g) | 15 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 5 × 1 × 1 cm |
What's in the box
- 1 x rain water collection printed circuit board (55 x 40 mm)
- 1 x 12V relay module
- 1 x 2-pin Dupont cable (20 cm)
Frequently Asked Questions
What does this rain sensor module actually do?
What power supply does the module need?
Can I adjust when the relay triggers?
What load can the relay switch?
What is included with the module?
How should I maintain the sensing board?
Overview
The Raindrops Detection Sensor Module combines a rain-collection circuit board with a 12V relay module, making it a practical building block for projects that need to react to water. Raindrops landing on the sensor board form conductive paths, and the comparator circuit converts that change into a usable output signal. When the moisture level crosses the threshold you set, the relay can switch an external device on or off.
Because the board uses a nickel-plated FR-04 double-sided material, it is built to resist oxidation and keep conductivity stable over repeated wet and dry cycles. The module is intended for makers, students and automation enthusiasts who want an affordable rain-detection stage inside a larger system.
Key Features
- Rain-sensing board: 55 x 40 mm collection area with nickel-plated surface for oxidation resistance and reliable conductivity.
- LM393 comparator: provides a clean waveform and a TTL-compatible output with strong driving capability.
- 12V relay output: contacts rated for 250V 10A AC or 30V 10A DC, so the module can switch motors, valves, lamps or other loads.
- Sensitivity adjustment: an onboard potentiometer lets you set the humidity or moisture level at which the relay changes state.
- Status indicators: power and output LEDs make it easy to confirm the module is powered and whether the relay has triggered.
- Simple mounting: a fixed bolt hole allows the board to be secured inside an enclosure or on a bracket.
Specifications Explained
12V operation: the module is designed around a 12V supply, which suits common relay and control setups. Quiescent current is listed at 5-12 mA, so the electronics themselves draw very little.
Relay capacity: the 250V 10A AC and 30V 10A DC ratings describe the maximum load the contacts are intended to handle. Always stay within these limits and match the relay type to your load.
Sensor dimensions: the collection board measures 55 x 40 mm and the module itself is listed at roughly 50 x 26 mm, with a weight of about 15 g. This makes it easy to fit into small weather housings and project boxes.
Comparator output: the LM393 stage provides a clean, TTL-compatible signal, which helps when feeding the result into a microcontroller or logic circuit.
Compatibility and Requirements
The module requires a 12V power source to operate. The relay contacts are separate from the sensing circuit, so the load you switch can be powered from its own supply as long as it stays within the stated AC or DC ratings. The TTL-compatible comparator output can be connected to logic-level inputs, but check the voltage levels of your own controller before wiring. No microcontroller is included or required for basic relay operation.
Typical Uses
- Weather monitoring and rainfall detection projects
- Automatic irrigation or plant-watering control
- Closing covers, windows or vents when rain starts
- Educational demonstrations of sensor and relay circuits
- General-purpose moisture-triggered switching
What's in the Box
- 1 x rain water collection printed circuit board (55 x 40 mm)
- 1 x 12V relay module
- 1 x 2-pin Dupont cable (20 cm)
Quick specs
- Item Type
- Sensor
- Model No. / Name
- Rain Detection Sensor
- Voltage Rating
- 12
- PCB Dimension (lxbxh)mm
- 55 x 40 sensor
- Relay Capacity
- 250V 10A (AC) 30V 10A (DC)
- Quiescent Current
- 5-12mA













