
1 / 2 · Click to enlarge
At a glance
This rain sensors is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.02 kg.
Key Highlights
- Shipping Weight: 0.02 kg
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Shipping Weight | 0.02 kg |
|---|---|
| Shipping Dimensions | 6 × 5 × 4 cm |
Overview
The Raindrops Detection Sensor Module with 5V Relay Module is listed in our rain sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 5 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Raindrop Detection Sensor Module detects the presence of water using a conductive PCB sensing plate and a comparator-based control module. When water droplets bridge the exposed conductive traces, the electrical resistance between them decreases.
This change alters the sensor's analog output voltage and can also trigger a digital output when a user-adjustable threshold is exceeded. The analog output provides an indication of the sensor plate's wetness level, while the digital output is useful for rain/no-rain detection applications. The module is intended for qualitative moisture detection rather than accurate rainfall measurement.
Features:
- Detects presence of rain and provides a relative wetness indication
- Analog output varies with conductivity changes on the sensing surface
- PCB-based resistive rain detection grid
- Compatible with Arduino, ESP32, Raspberry Pi and other microcontrollers
- Adjustable detection threshold using onboard potentiometer (LM393 comparator)
- Compact, low-power sensor module suitable for embedded applications
Specifications:
- Item Type : Raindrops Detection Sensor
- Comparator IC: LM393
- Output Type: Analog (voltage) + Digital (TTL)
- Sensor Board Size: 54mm × 40mm × 1.5mm
- Control Board Size: 32mm × 15mm × 9mm
- Operating Voltage: 5V DC
- Relay Output: 5V SPDT relay
- Sensor Type: Resistive rain detection plate
- Output Signal: Digital HIGH/LOW + relay switching
- Trigger Adjustment: Variable sensitivity potentiometer
- Load Capacity: Typically up to 10A @ 250V AC / 10A @ 30V DC (relay dependent)
- Interface: 3-pin (VCC, GND, DO/AO)
- Sensitivity Control: Potentiometer adjustable
- Material: FR-4 double-sided PCB
- Mounting: Pre-drilled bolt holes for easy installation
- Diamentions : 50 x 26 x 20
- Weight : 15g
Package Includes:
1 x Raindrops Detection Sensor Module with 5V Relay Module
1 x Control Board with LM393 Voltage Comparator
1 x A 2-Wire Dupont Cable













