
1 / 3 · Click to enlarge
AI Summary
A RAK11721 breakout board for EU868, RU864 and IN865 LoRa IoT development, with an SMA connector, Cortex-M4F microcontroller and RUI3/AT command support. It exposes UART, I2C, SPI, ADC and GPIO for fast sensor prototyping.
Key Highlights
- RAK11721 module with ARM Cortex-M4F, 1 MB flash and 348 KB SRAM
- SMA connector for LoRa and onboard chip antenna for BLE
- Supports EU868, RU864 and IN865 800 MHz regional bands
- UART, I2C, SPI, ADC and GPIO for sensor integration
- 1.8 to 3.6 V supply voltage with -40 to 85 degrees C range
- RUI3 API and AT command support for simple development
Ideal For
- IoT developers prototyping LoRa sensor nodes for EU868, RU864 or IN865 networks
- Hardware engineers evaluating the RAK11720 platform before a custom design
- Makers building low-power remote monitoring devices
- Industrial teams deploying outdoor sensors in the -40 to 85 degrees C range
- Educators teaching embedded and LoRa development with RUI3 and AT commands
Buying Tip
Confirm that your region uses EU868, RU864 or IN865 before ordering, since this 800 MHz variant is band-specific and will not suit 915 MHz deployments.
Elecvora expert review
Our verdict
A practical breakout for anyone prototyping LoRa IoT devices in EU868, RU864 or IN865 regions, with a capable Cortex-M4F core and sensible I/O access. It is an evaluation board, so expect to supply your own antenna, power and firmware work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Cortex-M4F with 1 MB flash and 348 KB SRAM gives firmware headroom
- Separate SMA and chip antennas simplify LoRa and BLE setup
- Wide 1.8 to 3.6 V supply and -40 to 85 degrees C rating
- RUI3 API and AT commands lower the entry barrier
Cons
- Band-specific to EU868, RU864 and IN865
- No antenna or power supply included
- Sleep current of 2.37 microamps still requires careful power design for long battery life
Best for
Developers prototyping LoRa IoT nodes in 800 MHz European, Russian or Indian bands
Not ideal for
Projects requiring 915 MHz operation or a fully enclosed, ready-to-deploy device
Specifications
| Antenna Connector Type | SMA |
|---|---|
| Supply Voltage | 1.8 to 3.6 |
| Shipping Weight | 0.082 kg |
| Shipping Dimensions | 22 × 10 × 4 cm |
What's in the box
- 1 x RAKwireless WisDuo Breakout Board RAK11721 /800 MHz for EU868/RU864/IN865
Frequently Asked Questions
Which frequency bands does this board support?
What supply voltage does it need?
Does it include an antenna?
How do I program the board?
What is in the box?
Can it be used outdoors?
Overview
The RAKwireless WisDuo Breakout Board RAK11721 is a compact development platform for low-power, long-range IoT communication in the 800 MHz bands used across EU868, RU864 and IN865 regions. It is built around the RAK11721 module, combining an ARM Cortex-M4F microcontroller with LoRa modulation, so sensing, processing and radio tasks can live on one board.
Because the board breaks out the module's pins, it works well for bench evaluation, pilot builds and small production runs where a custom carrier board is not yet justified.
Key Features
- Integrated RAK11721 module with 1 MB flash and 348 KB SRAM for application firmware and buffering.
- Dual antenna arrangement: an SMA connector for LoRa and an onboard chip antenna for BLE.
- Flexible I/O: UART, I2C, SPI, ADC and GPIO pins for sensors, displays and peripherals.
- Wide supply range from 1.8 to 3.6 V to match different power architectures.
- Industrial temperature rating of -40 to 85 degrees C for outdoor and enclosed deployments.
- RUI3 API and AT command support for configuration and firmware development.
Specifications Explained
The SMA connector is the LoRa interface, so you can attach an external antenna suited to your regional band and mounting position. BLE traffic uses the onboard chip antenna, which keeps the board small and removes a second external antenna from the bill of materials.
The 1.8 to 3.6 V supply range means the board can run from common regulated rails, including 3.3 V logic systems, without an extra regulator stage. Sleep current is quoted at 2.37 microamps, which matters for battery-backed sensor nodes that spend most of their time idle.
The Cortex-M4F core with 1 MB flash and 348 KB SRAM provides headroom for protocol stacks and application logic. With an optimised antenna, the module is rated for a range greater than 15 km, though real-world distance depends on terrain, antenna choice and output settings.
Compatibility and Requirements
This variant is intended for the EU868, RU864 and IN865 frequency bands. Check that your deployment region matches one of these before ordering. You will need to supply your own regulated power source within the 1.8 to 3.6 V range and a suitable LoRa antenna for the SMA connector. Firmware can be written with the RUI3 API or configured through AT commands.
Typical Uses
- Sensor nodes for remote monitoring and telemetry
- LoRa and BLE gateway or node prototyping
- Industrial and outdoor installations within the rated temperature range
- Evaluation of the RAK11720 platform before custom hardware design
What's in the Box
One RAKwireless WisDuo Breakout Board RAK11721 /800 MHz for EU868/RU864/IN865.
Quick specs
- Antenna Connector Type
- SMA
- Supply Voltage
- 1.8 to 3.6
- Shipping Weight
- 0.082 kg
- Shipping Dimensions
- 22 × 10 × 4 cm



















