
1 / 4 · Click to enlarge
At a glance
Made by Raspberry Pi, this multi-brand raspberry pi cases is a good fit for makers, students and electronics hobbyists. Main specs: compatibility Pi 3B+; color Black; no. of unassembled pieces 3.
Key Highlights
- Compatibility: Pi 3B+
- Color: Black
- No. of Unassembled Pieces: 3
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Compatibility | Pi 3B+ |
|---|---|
| Color | Black |
| No. of Unassembled Pieces | 3 |
| Supported | All Variant of Pi 3 Models B and B+ |
| Length (mm) | 100 |
| Width (mm) | 64 |
| Weight (g) | 50 |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 11 × 7.5 × 4.7 cm |
Overview
The Raspberry 3B+ Injection Molding Case Supporting Camera, made by Raspberry Pi, is listed in our multi-brand raspberry pi cases range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Compatibility: Pi 3B+
- Color: Black
- No. of Unassembled Pieces: 3
- Supported: All Variant of Pi 3 Models B and B+ (confirm your cable or board uses the same connector)
- Length (mm): 100 (measure your mounting space before ordering)
- Width (mm): 64 (measure your mounting space before ordering)
- Weight (g): 50 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.055 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a newly arrived high quality, very lightweight case for Raspberry Pi 3B and 3B+ models. It is unassembled only 3-piece Smooth matt finished black ABS plastics case which provides adequate protection for your Pi and access to all the ports. The case is compatible with all the launched Raspberry pi 3 Models. It is very easy to assemble and de-assemble with accurately designed locking notches and 4 small screws to lock the case.
It has a Rotatable top design for protection from different angles. The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera. With screws for free adjustment of the degree, its Easy to use and install. The entire casing is injection molded from ABS. The new design has a camera mount port that allows the top of the box to exit and the board to be placed on the camera mount port. Next to the camera stand, there is a port for the camera line. Support for Raspberry Pi official camera, fan, cable installation. Compatible with Raspberry Pi 3B+/3B/2B, access to all ports for Raspberry Pi 3B +, 3B. You need not put any effort into fitting the pi inside the case, it fits the pi accurately just like the mobile phone cover.
Note: The stand for the case as shown in the picture is not included in the package.
Features:
- Compatible for All variants of the Raspberry pi 3 Model B+
- Easy to assemble and highly durable material
- Locking screw holes and anti-slip rubber feet at the back.
- Uses: For Raspberry Pi surveillance camera shell
- The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera.
Package Includes:
1 x Raspberry 3B Injection Molding Case Supporting Camera 1 x Screw Set
Quick specs
- Compatibility
- Pi 3B+
- Color
- Black
- No. of Unassembled Pieces
- 3
- Supported
- All Variant of Pi 3 Models B and B+
- Length (mm)
- 100
- Width (mm)
- 64



















