Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A lightweight three-piece ABS case for Raspberry Pi 4 Model B with a fan slot and GPIO access. It snaps together easily and protects your board while keeping all ports usable.

Key Highlights

  • Fits all Raspberry Pi 4 Model B variants
  • Three-piece snap-fit assembly with four screws
  • Cooling fan slot above the processor
  • GPIO and CSI ribbon cable routing slot
  • Micro SD cut-out for easy card access
  • Smooth matte black ABS with anti-slip rubber feet

Ideal For

  • Raspberry Pi 4 owners needing a low-cost protective case
  • Makers and hobbyists building custom projects with GPIO access
  • Students and educators setting up Pi 4 for learning
  • Home automation enthusiasts mounting a Pi 4 discreetly
  • Media centre builders wanting a slim, quiet enclosure

Buying Tip

Check that you have a small Phillips screwdriver on hand for assembly, and consider adding a 30 mm fan if you plan to run the Pi 4 under heavy load.

Elecvora expert review

Our verdict

A no-frills, budget-friendly case that does exactly what it should: protect your Pi 4 and keep ports accessible. The fan slot and GPIO routing add practicality for tinkerers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very lightweight and slim
  • Easy snap-fit assembly with screws
  • Fan slot and ventilation grill
  • GPIO and CSI cable routing
  • Micro SD cut-out for quick access

Cons

  • Fan and Raspberry Pi board not included
  • Requires a screwdriver for final assembly
  • No official certifications or warranty stated

Best for

Budget-conscious Pi 4 users who need a simple, functional case with expansion options.

Not ideal for

Users seeking a rugged, weatherproof, or fan-included enclosure.

Specifications

CompatibilityPi 4
ColorBlack
No. of Unassembled Pieces3
SupportedAll Variant of Pi 4 Models B
Length (mm)91
Width (mm)67
Weight (g)35
Shipping Weight0.039 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 1 x Three-piece ABS case for Raspberry Pi 4 Model B
  • 1 x Set of rubber grips
  • 1 x Screw set

Frequently Asked Questions

Does this case fit all Raspberry Pi 4 Model B variants?
Yes, it is compatible with all variants of the Raspberry Pi 4 Model B, including models with different RAM sizes.
Is a cooling fan included?
No, the case has a slot for a cooling fan, but the fan itself is not included.
Can I access the GPIO pins with the case on?
Yes, there is a dedicated slot on the side for routing GPIO and CSI ribbon cables, so you can connect expansion boards without removing the case.
How do I insert or remove the micro SD card?
The bottom panel has a cut-out that allows you to insert or remove the micro SD card without disassembling the case.
What is included in the package?
The package includes the three-piece ABS case, a set of rubber grips, and a screw set. The Raspberry Pi board and fan are not included.
Do I need any tools for assembly?
Yes, a small Phillips screwdriver is required to secure the four screws. The case also uses locking notches for a snap-fit.

Overview

The Raspberry Pi 4 Black Compact ABS Case is a simple, effective enclosure for your Raspberry Pi 4 Model B. Made from lightweight ABS plastic with a smooth matte black finish, it provides reliable protection without hiding your board's connectivity. The case arrives as three unassembled pieces and locks together using precisely designed notches and four small screws, so you can assemble or disassemble it quickly.

Key Features

  • Three-piece construction – easy to snap together and take apart.
  • Fan slot – a cut-out directly above the processor accepts a cooling fan (fan not included).
  • Ventilation grill – positioned opposite the USB ports to encourage airflow during continuous operation.
  • GPIO and CSI slot – route ribbon cables cleanly for expansion projects.
  • Micro SD access – a cut-out in the bottom panel lets you insert or remove the card without opening the case.
  • LED visibility – status lights remain clearly visible through the case.
  • Anti-slip rubber feet – included set keeps the case stable on your desk.

Specifications Explained

With external dimensions of 91 mm by 67 mm and a weight of just 35 g, this case adds minimal bulk to your Pi 4. The black ABS material is durable and easy to clean. The three unassembled pieces include the main body, top cover, and bottom panel with screw holes. All ports on the Pi 4 Model B remain accessible, including USB, Ethernet, HDMI, audio, and power.

Compatibility and Requirements

This case is compatible with all variants of the Raspberry Pi 4 Model B. A Raspberry Pi 4 board and a cooling fan are not included and must be purchased separately. Assembly requires a small Phillips screwdriver (not included).

Typical Uses

Perfect for home automation hubs, media centres, retro gaming consoles, learning projects, and general desktop use. The fan slot and ventilation grill make it suitable for sustained workloads when paired with a fan.

What's in the Box

  • 1 x Three-piece ABS case for Raspberry Pi 4 Model B
  • 1 x Set of rubber grips
  • 1 x Screw set

Quick specs

Compatibility
Pi 4
Color
Black
No. of Unassembled Pieces
3
Supported
All Variant of Pi 4 Models B
Length (mm)
91
Width (mm)
67
See all specifications