Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A three-piece transparent ABS case for the Raspberry Pi 4 Model B that locks together with four screws and keeps all ports and status LEDs visible. It includes a fan slot above the processor area plus a side vent grille for airflow.

Key Highlights

  • Three-piece transparent ABS shell with a smooth matt finish
  • Fits all variants of the Raspberry Pi 4 Model B
  • Fan slot sized for a DC 5V 0.2A 4010S cooling fan
  • Cut-outs keep every port and the status LEDs accessible
  • Screw-locked panels with locking notches for quick assembly
  • Compact 91 x 67 mm footprint at only 39 g

Ideal For

  • Raspberry Pi 4 owners who want a low-cost protective shell
  • Makers building a fan-cooled Pi 4 home server
  • Students and beginners assembling their first Pi project
  • Users who like to see board status LEDs without opening a case
  • Hobbyists running a Pi 4 as a media centre or retro console

Buying Tip

Check that you have a DC 5V 0.2A 4010S fan on hand before ordering, since the case provides the slot but not the fan itself.

Elecvora expert review

Our verdict

A sensible, low-cost way to protect a Raspberry Pi 4 while keeping the board and its LEDs on show. The fan slot and vent grille give you room to add airflow later, though you will need to buy the fan separately.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear ABS shows the board and status LEDs
  • Fan slot and vent grille support airflow planning
  • Three-piece screw-locked design is easy to open again
  • All ports and the microSD card stay accessible
  • Very light at 39 g with a small 91 x 67 mm footprint

Cons

  • Cooling fan is not included
  • Board is not included
  • Screws must be kept safe when the case is opened

Best for

Budget-conscious Pi 4 owners who want a clear, openable case with fan options

Not ideal for

Users who want a pre-assembled, tool-free enclosure with a fan already fitted

Specifications

CompatibilityPi 4
Additional Specs.Cooling Fan Slot
No. of Unassembled Pieces3
SupportedAll Variant of Pi 4 Models B
Length (mm)91
Width (mm)67
Weight (g)39
ColorTransparent
Shipping Weight0.07 kg
Shipping Dimensions11 × 9 × 3 cm

What's in the box

  • 1 x Transparent ABS case for Raspberry Pi 4 with cooling fan slot (3 unassembled pieces)
  • 1 x Screw set

Frequently Asked Questions

Which Raspberry Pi models does this case fit?
It is made for the Raspberry Pi 4 and is stated to support all variants of the Pi 4 Model B. A Raspberry Pi board is not included.
Is a cooling fan included?
No. The case has a slot for a DC 5V 0.2A 4010S cooling fan, but the fan must be purchased separately.
Do I need tools to assemble it?
You need to fit the four small screws from the supplied screw set. The panels also use locking notches, so assembly and disassembly are straightforward.
Can I reach the ports and microSD card with the case on?
Yes. The case has openings aligned with the Pi 4 ports, and the microSD card can be accessed through the bottom panel.
Will I be able to see the status LEDs?
Yes. The transparent ABS panels let you see the board and its status indicator lights without removing the case.
How should I clean the case?
Wipe the ABS panels with a soft, slightly damp cloth and avoid harsh solvents. Keep the vent grille clear of dust so airflow is not restricted.

Overview

This is a compact enclosure for the Raspberry Pi 4 Model B, supplied as three unassembled ABS pieces in a transparent finish. The clear material lets you see the board, the status LEDs and any add-on hardware without opening the shell, while the matt surface keeps fingerprints and glare under control. Accurate openings line up with each port, so HDMI, USB, Ethernet, audio and power connections stay usable once the Pi is inside.

The design is deliberately simple: the panels meet at moulded locking notches and are held by four small screws. That means the case goes together quickly and comes apart again just as easily when you want to change a microSD card or add a fan.

Key Features

  • Transparent ABS build: a lightweight shell that shows the board and its indicator lights.
  • Cooling fan slot: a dedicated opening sits directly over the processor position for a 4010S fan.
  • Ventilation grille: a grille on the side opposite the USB ports helps warm air move through the case.
  • Port access: cut-outs are aligned with the Pi 4 connectors, and the microSD card can be reached from the bottom panel.
  • Screw-locked panels: four screws plus locking notches keep the three pieces firmly together.
  • Light footprint: 91 x 67 mm and 39 g, so it barely changes the size or weight of your setup.

Specifications Explained

Compatibility is stated for the Raspberry Pi 4 and for all variants of the Pi 4 Model B, so you do not need to match a specific memory version. The three unassembled pieces are the parts you receive; assembly is part of the process and needs no special tools beyond the supplied screw set. The cooling fan slot is intended for a DC 5V 0.2A 4010S fan, which is not included, so plan for that part separately if you want active cooling. The 91 x 67 mm dimensions and 39 g weight describe the case itself and keep the finished build close to the bare board's size.

Compatibility and Requirements

The case is designed for the Raspberry Pi 4 Model B in any variant. A Raspberry Pi 4 board is not included, and neither is a cooling fan. If you intend to fit a fan, choose a DC 5V 0.2A 4010S unit to match the slot. The screw set needed to close the case is supplied with it.

Typical Uses

Use it for a home server, a media centre, a desktop learning machine, a retro gaming build or a workshop controller where the board should stay visible but protected. The clear panels are handy when you want to check activity LEDs at a glance without dismantling anything.

What's in the Box

  • 1 x Transparent ABS case for Raspberry Pi 4 with cooling fan slot (3 pieces, unassembled)
  • 1 x Screw set

Quick specs

Compatibility
Pi 4
Additional Specs.
Cooling Fan Slot
No. of Unassembled Pieces
3
Supported
All Variant of Pi 4 Models B
Length (mm)
91
Width (mm)
67
See all specifications