Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A transparent two-piece acrylic case for Raspberry Pi Zero boards, supplied with screws and nuts and a cutout for a heat sink. It keeps the board protected while leaving ports and controls accessible.

Key Highlights

  • Clear two-piece acrylic shell sized for Raspberry Pi Zero boards
  • Includes screws and nuts for straightforward assembly
  • Dedicated opening for fitting a heat sink
  • Full access to board controls and features
  • Shell supports mounting of building blocks
  • Weighs about 15 g and measures 65 x 35 x 3 mm

Ideal For

  • Makers building compact Raspberry Pi Zero projects
  • Hobbyists who want a clear protective cover for a Zero board
  • Educators assembling small single-board computer kits
  • Users planning to add a heat sink to a Pi Zero
  • Builders who want building block mounting options

Buying Tip

Peel the protective film from both acrylic shells before assembly and tighten the screws gently to avoid cracking the material.

Elecvora expert review

Our verdict

A simple, low-cost way to protect a Raspberry Pi Zero while keeping the board visible. The included screws and heat sink cutout make it practical for small builds, provided you handle the acrylic carefully.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear shell keeps the board and LEDs visible
  • Screws and nuts included for assembly
  • Heat sink opening supports cooling
  • Very light at around 15 g
  • Building block mounting adds flexibility

Cons

  • Acrylic can crack if screws are over-tightened
  • Raspberry Pi Zero board is not included
  • Protective film must be removed before use

Best for

Raspberry Pi Zero owners wanting a clear, lightweight protective cover

Not ideal for

Users needing a rugged or weatherproof enclosure

Specifications

CompatibilityPi Series
Dimensions (L x W x H) mm65 x 35 x 3
Weight (g)15
ColorTransparent
Shipping Weight0.018 kg
Shipping Dimensions7 × 4 × 1 cm

What's in the box

  • 1 x Raspberry Pi acrylic Zero case shell (two shells)
  • Screws and nuts

Frequently Asked Questions

Does this case include a Raspberry Pi Zero board?
No. The package contains the acrylic case shells plus screws and nuts. A Raspberry Pi Zero board must be purchased separately.
Why does the acrylic look cloudy?
A protective film is applied to the acrylic for shipping. Peel it off before assembly and the panels become clear.
Can I fit a heat sink with the case installed?
Yes. The case has an opening intended for installing a heat sink on the board.
What is included with the case?
You receive the two acrylic case shells together with the screws and nuts needed for assembly.
How should I clean the acrylic?
Wipe it with a soft, slightly damp cloth. Avoid harsh solvents and do not over-tighten the screws, as acrylic can crack under stress.
Are the board's ports still accessible?
Yes. The shell is designed to give full access to the board's controls and features.

Overview

This transparent acrylic case is a protection box designed for Raspberry Pi Zero boards. It arrives as two shells that sandwich the board, held together with the included screws and nuts, so the electronics stay covered during handling, storage and everyday use. Because the material is clear, you can still see the board layout and check indicator LEDs without opening the case.

The acrylic is supplied with a protective film on its surface, so it may look cloudy or marked when it first arrives. Peel the film away before assembly and the panels become clear. The material is rigid and lightweight, and it should be handled with a little care during installation since acrylic can crack if over-tightened.

Key Features

  • Two-piece shell: the case consists of two acrylic shells that enclose the board and fasten with screws and nuts.
  • Heat sink opening: a cutout in the case allows a heat sink to be fitted for extra thermal headroom.
  • Accessible design: the shell is shaped to give full access to the board's controls and features.
  • Building block mounting: the shell can be used to install building blocks, useful for custom mounts and small projects.
  • Lightweight: at about 15 g, the case barely affects the weight of a finished build.

Specifications Explained

The case measures 65 x 35 x 3 mm and weighs approximately 15 g. Those figures describe a slim, low-profile cover rather than a bulky enclosure, which suits compact projects where space is tight. The transparent colour keeps the board visible, and the acrylic construction provides a rigid outer layer around the PCB.

Shipping weight is listed at 0.018 kg with shipping dimensions of 7 x 4 x 1 cm, so the package is small and easy to store or post. The compatibility listing covers the Pi Series, with the case specifically intended for Raspberry Pi Zero boards.

Compatibility and Requirements

The case is made for Raspberry Pi Zero boards and is listed under Pi Series compatibility. A Raspberry Pi Zero board is required to use the case and is not supplied. If you plan to add cooling, a heat sink can be fitted through the opening in the shell.

Typical Uses

This case suits Raspberry Pi Zero projects that need a simple protective layer, such as compact home automation nodes, small media or display builds, sensor stations and learning projects. The building block mounting points also make it handy for custom brackets and enclosures in hobby builds.

What's in the Box

  • 1 x Raspberry Pi acrylic Zero case shell (two shells)
  • Screws and nuts

Quick specs

Compatibility
Pi Series
Dimensions (L x W x H) mm
65 x 35 x 3
Weight (g)
15
Color
Transparent
Shipping Weight
0.018 kg
Shipping Dimensions
7 × 4 × 1 cm
See all specifications