
1 / 5 · Click to enlarge
AI Summary
The official 48W power supply for Raspberry Pi Build HAT delivers a stable 8V DC 6A output to run your Pi and LEGO motors from a single adapter. Its thick 1.5m cable and secure barrel jack ensure reliable power for demanding robotics builds.
Key Highlights
- 48W power supply officially designed for Build HAT
- 8V DC output at 6A nominal current
- 1.5m 16AWG cable for low voltage drop
- Barrel connector 5.5mm x 2.1mm centre positive
- Short circuit, overcurrent, and overvoltage protection
- Wide 110-240V AC input for international use
Ideal For
- Educators building LEGO robotics with Raspberry Pi
- Makers creating motorised LEGO Technic projects
- Hobbyists using Build HAT for automation
- Students learning robotics and coding
Buying Tip
Check that your project uses the Build HAT with its 5.5mm x 2.1mm barrel jack, as this supply is dedicated to that setup.
Elecvora expert review
Our verdict
The official Raspberry Pi 48W power supply for Build HAT is a reliable, well-built adapter that simplifies powering LEGO robotics projects. Its robust cable and comprehensive protection make it a safe choice for demanding builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Delivers ample 6A current for Pi and motors
- Thick 16AWG cable reduces voltage drop
- Built-in protection circuits for safety
- Wide input voltage for international use
Cons
- Dedicated to Build HAT, not general-purpose
- Barrel jack may not fit other devices
Best for
Raspberry Pi Build HAT and LEGO motor projects
Not ideal for
Powering other Raspberry Pi models without Build HAT
Specifications
| Output Voltage | +8.0V DC |
|---|---|
| Minimum load current | 0.01A |
| Nominal load current | 6.0A |
| Frequency | 50/60Hz ±3Hz |
| Power consumption (no load) | 0.1W maximum |
| Inrush current | No damage shall occur and the input fuse shall not blow |
| Max. Power (W) | 48.0W |
| Ripple and Noise | 200mVp-p |
| Shipping Weight | 0.21 kg |
| Shipping Dimensions | 10 × 8 × 4 cm |
What's in the box
- 1 x Official Raspberry Pi 48W Power Supply for Build HAT + LEGO Motors
Frequently Asked Questions
Can this power supply run both the Raspberry Pi and LEGO motors?
What is the output voltage and current?
Does it include a power cable for the wall outlet?
Is the barrel connector centre positive?
What safety protections are built in?
Can I use this with other Raspberry Pi models?
Overview
The official Raspberry Pi 48W power supply is the recommended power source for the Build HAT and LEGO Technic motors. It provides a regulated 8V DC output at up to 6A, supplying enough current to power both the Raspberry Pi and connected LEGO motors and sensors simultaneously. This eliminates the need for a separate power brick for the Pi when using the Build HAT.
Key Features
- 48W maximum power – ample headroom for demanding robotics projects.
- 8V DC, 6A output – stable voltage for Build HAT and LEGO motors.
- 1.5m 16AWG cable – thick gauge minimises voltage drop over distance.
- Barrel connector 5.5mm x 2.1mm x 11mm – centre positive, secure fit.
- Comprehensive protection – short circuit, overcurrent, and overvoltage safeguards.
- Wide AC input – 110-240V, 50/60Hz for worldwide compatibility.
Specifications Explained
Output Voltage: 8.0V DC is the correct voltage for the Build HAT and LEGO motors, ensuring safe and reliable operation.
Nominal Load Current: 6.0A provides enough current to run the Raspberry Pi and multiple motors without browning out. Minimum load current is 0.01A, so it works even with light loads.
Ripple and Noise: 200mVp-p maximum ensures clean power for sensitive electronics.
Efficiency: 87.77% minimum at 25-100% load reduces heat and energy waste.
Protection: Built-in safeguards prevent damage from short circuits, overcurrent, and overvoltage.
Compatibility and Requirements
This power supply is designed for the Raspberry Pi Build HAT. It connects via a 5.5mm x 2.1mm barrel jack (centre positive). It requires a mains AC input of 110-240V, 50/60Hz.
Typical Uses
- Powering Raspberry Pi and LEGO motors in robotics projects
- Educational STEM and maker workshops
- Home automation and prototype builds
- LEGO Technic motorised creations
What's in the Box
- 1 x Official Raspberry Pi 48W Power Supply for Build HAT + LEGO Motors
Quick specs
- Output Voltage
- +8.0V DC
- Minimum load current
- 0.01A
- Nominal load current
- 6.0A
- Frequency
- 50/60Hz ±3Hz
- Power consumption (no load)
- 0.1W maximum
- Inrush current
- No damage shall occur and the input fuse shall not blow




















