Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Raspberry Pi, this raspberry pi add on boards (hat) is a good fit for makers, students and electronics hobbyists. Main specs: usb bus power 5V, up to 500mA; operating voltage 2.7V to 5.25V; firmware Raspberry Pi Picoprobe open-source firmware, which can be updated over USB. Check that your power source supplies 2.7V to 5.25V before connecting it.

Key Highlights

  • USB bus power: 5V, up to 500mA
  • Operating Voltage: 2.7V to 5.25V
  • Firmware: Raspberry Pi Picoprobe open-source firmware, which can be updated over USB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

USB bus power5V, up to 500mA
Operating Voltage2.7V to 5.25V
FirmwareRaspberry Pi Picoprobe open-source firmware, which can be updated over USB
OS SupportsWindows, Mac OS X, and Linux (with appropriate drivers)
Supportedwith the CMSIS-DAP standard
Shipping Weight0.03 kg
Shipping Dimensions6 × 5 × 3 cm

Overview

The Official Raspberry Pi Debug Probe, made by Raspberry Pi, is listed in our raspberry pi add on boards (hat) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • USB bus power: 5V, up to 500mA
  • Operating Voltage: 2.7V to 5.25V (match this to your power supply; too high a voltage can damage the part)
  • Firmware: Raspberry Pi Picoprobe open-source firmware, which can be updated over USB
  • OS Supports: Windows, Mac OS X, and Linux (with appropriate drivers) (confirm your cable or board uses the same connector)
  • Supported: with the CMSIS-DAP standard (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 6 × 5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The New Launched  Raspberry Pi Debug Probe is an inexpensive, all-in-one USB-to-serial debug and UART bridge. It provides the necessary hardware and cabling to support “plug and play” debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms. The Raspberry Pi Debug Probe provides both a processor serial debug interface (by default this is the ARM Serial Wire Debug interface) and an industry-standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the Raspberry Pi 3-pin debug connector specification. The Raspberry Pi Debug Probe is provided as a kit, containing the probe hardware in a plastic case, and a set of cables: a USB cable, and three different types of debug cables to cover the vast majority of use cases. While it has been designed primarily for use with Raspberry Pi debug targets, the Debug Probe provides standard CMSIS-DAP debug and UART interfaces over USB; it can therefore be used to debug other targets, or simply as a cost-effective USB-to-UART cable. The Raspberry Pi Debug Probe is based on the Raspberry Pi Pico hardware design and runs the open-source Raspberry Pi Picoprobe software [picoprobe]. Updating the firmware is accomplished in the same way as on a Raspberry Pi Pico, so it is straightforward to keep the unit up to date with the latest Picoprobe firmware or to use custom firmware.

Note: Actual product may vary in terms of cables color.


Features:

  1. All-in-one USB-to-serial debug and UART bridge
  2. Both interfaces use a 3-pin debug connector
  3. Open-source Raspberry Pi Picoprobe software
  4. Three different types of debug cables to cover the vast majority of use cases
  5. plug and play” debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.

  For Technical Details about the product go through the datasheet in the attachments


Package Includes:

1 x Official Raspberry Pi Debug Probe    

Quick specs

USB bus power
5V, up to 500mA
Operating Voltage
2.7V to 5.25V
Firmware
Raspberry Pi Picoprobe open-source firmware, which can be updated over USB
OS Supports
Windows, Mac OS X, and Linux (with appropriate drivers)
Supported
with the CMSIS-DAP standard
Shipping Weight
0.03 kg
See all specifications