
1 / 2 · Click to enlarge
At a glance
Made by Raspberry Pi, this raspberry pi compatible accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type PoE+ Injector; supply voltage 100-240 AC; max output current (ma) 30W (55V, 550mA). Check that your power source supplies 100-240 AC before connecting it.
Key Highlights
- Item Type: PoE+ Injector
- Supply Voltage: 100-240 AC
- Max Output Current (mA): 30W (55V, 550mA)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | PoE+ Injector |
|---|---|
| Supply Voltage | 100-240 AC |
| Max Output Current (mA) | 30W (55V, 550mA) |
| Data Rate | 10/100/1000 |
| Output Connector | RJ45 (Data + Power) |
| Shipping Weight | 0.02 kg |
Overview
The Raspberry Pi PoE+ Injector 30W Gigabit Power Over Ethernet Adapter (IEEE 802.3af/at) for Raspberry Pi Boards, made by Raspberry Pi, is listed in our raspberry pi compatible accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: PoE+ Injector
- Supply Voltage: 100-240 AC (match this to your power supply; too high a voltage can damage the part)
- Max Output Current (mA): 30W (55V, 550mA) (your supply must deliver at least this much current)
- Data Rate: 10/100/1000
- Output Connector: RJ45 (Data + Power) (confirm your cable or board uses the same connector)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Official Raspberry Pi PoE+ Injector is a single‑port Power over Ethernet (PoE+) midspan injector designed to deliver both network data and power over a single Ethernet cable to PoE‑enabled devices such as Raspberry Pi boards equipped with a compatible PoE HAT.
It conforms to IEEE 802.3at (PoE+) and 802.3af (PoE) standards, providing up to 30 W of output power at a nominal 55 V DC for robust operation under load. The injector supports Gigabit Ethernet (10/100/1000 Mbps) passthrough, ensuring high‑speed network performance while supplying power.
Input is via 100–240 V AC mains (IEC C13 socket), and output is delivered on the RJ‑45 interface, combining data and power. Designed for reliability, it offers automatic device detection and protection against non‑standard Ethernet terminals. Compact dimensions (159 × 51.8 × 33.5 mm) and broad environmental tolerances make it suitable for embedded, industrial, and remote deployments. IEC power cable is not included.
Features:
- 30W PoE+ Injector for Raspberry Pi boards
- Gigabit Ethernet (10/100/1000 Mbps) support
- 55V, 550mA power output for PoE devices
- RJ45 input (Data) & RJ45 output (Data + Power)
- 100-240V AC input for worldwide use
- Requires a separate IEC mains lead (not included)
Package Includes:
1 x Raspberry Pi PoE+ Injector 30W Gigabit Power Over Ethernet Adapter (IEEE 802.3af/at) for Raspberry Pi Boards
Quick specs
- Item Type
- PoE+ Injector
- Supply Voltage
- 100-240 AC
- Max Output Current (mA)
- 30W (55V, 550mA)
- Data Rate
- 10/100/1000
- Output Connector
- RJ45 (Data + Power)
- Shipping Weight
- 0.02 kg



















