
1 / 2 · Click to enlarge
At a glance
Made by Raspberry Pi, this raspberry pi microcontrollers is a good fit for makers, students and electronics hobbyists. Main specs: item type IC; model no. / name RP2040 IC; processor Dual ARM Cortex-M0+ cores.
Key Highlights
- Item Type: IC
- Model No. / Name: RP2040 IC
- Processor: Dual ARM Cortex-M0+ cores
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | IC |
|---|---|
| Model No. / Name | RP2040 IC |
| Processor | Dual ARM Cortex-M0+ cores |
| SPI Flash | 2M on-board QSPI |
| Max. Clock Frequency (MHz) | 133 |
| SRAM | 264 |
| GPIO | 30 |
| PWM | 16 channels |
| ADC / DAC | 3 available × 12-bit |
| UART | 2 |
| I2C | 2 Buses |
| SPI | 2 Buses |
| Length (mm) | 25 |
| Width (mm) | 25 |
| Weight (g) | 8 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 3 × 1 cm |
Overview
The Raspberry PI RP2040 Microcontroller IC, made by Raspberry Pi, is listed in our raspberry pi microcontrollers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: IC
- Model No. / Name: RP2040 IC
- Processor: Dual ARM Cortex-M0+ cores (look up this chip to confirm it runs the firmware or libraries you plan to use)
- SPI Flash: 2M on-board QSPI (space for firmware, files or media)
- Max. Clock Frequency (MHz): 133 (make sure the rest of your system works at this frequency)
- SRAM: 264
- GPIO: 30
- PWM: 16 channels
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
RP2040 is the debut microcontroller from Raspberry Pi. It brings our signature values of high performance, low cost, and ease of use to the microcontroller space. With a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with our unique Programmable I/O (PIO) subsystem, it provides professional users with unrivaled power and flexibility.
Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost any external device. High-performance breezes through integer workloads. Low cost helps ease the barrier to entry.
This isn’t just a powerful chip: it’s designed to help you bring every last drop of that power to bear. With six independent banks of RAM and a fully connected switch at the heart of its bus fabric, you can easily arrange for the cores and DMA engines to run in parallel without contention.
RP2040 builds Raspberry Pi’s commitment to inexpensive, efficient computing into a small and powerful 7 mm × 7 mm package, with just two square millimeters of 40 nm silicon.
With detailed documentation, a polished MicroPython port, and a UF2 bootloader in ROM, it has the lowest possible barrier to entry for beginner and hobbyist users. RP2040 is a stateless device, with support for cached execute-in-place from external QSPI memory.
This design decision allows you to choose the appropriate density of non-volatile storage for your application, and to benefit from the low pricing of commodity Flash parts. RP2040 is manufactured on a modern 40nm process node, delivering high performance, low dynamic power consumption, and low leakage, with a variety of low-power modes to support extended-duration operation on battery power.
Read more about RP2040 on Raspberry Pi Official Page Click Here
Key Features and Specifications:
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analog inputs
- Peripherals: ◦ 2 UARTs ◦ 2 SPI controllers ◦2 I2C controllers ◦16 PWM channels ◦USB 1.1 controller and PHY, with host and device support ◦8 PIO state machines
- Whatever your microcontroller application, from machine learning to motor control, from agriculture to audio, RP2040has the performance, feature set, and support to make your product fly.
Package Includes:
1 x RP2040 Microcontroller IC by Raspberry PIQuick specs
- Item Type
- IC
- Model No. / Name
- RP2040 IC
- Processor
- Dual ARM Cortex-M0+ cores
- SPI Flash
- 2M on-board QSPI
- Max. Clock Frequency (MHz)
- 133
- SRAM
- 264



















