
1 / 4 · Click to enlarge
At a glance
This multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Other Board; board type Expansion Board; gpio used LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22. Check that your power source supplies 6 ~ 26 before connecting it.
Key Highlights
- Item Type: Other Board
- Board Type: Expansion Board
- GPIO Used: LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Other Board |
|---|---|
| Board Type | Expansion Board |
| Operating Voltage (VDC) | 6 ~ 26 |
| GPIO Used | LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22 |
| Additional Specs. | Analog Audio Output Level: 2V RMS |
| Headphone Max Output Power | 142mW at 16Ω |
| Amplifier Type | 2×30W at 8Ω BTL Load at 24Vdc, Max Output Power |
| Sampling Rate | pto 24bit / 192KHz (Raspberry Pi I2S) |
| Length (mm) | 85 |
| Width (mm) | 55 |
| Weight (g) | 78 |
| Shipping Weight | 0.078 kg |
| Shipping Dimensions | 11 × 10 × 5 cm |
Overview
The Raspberry Pi X400 Multifunctional Expansion Board is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Other Board
- Board Type: Expansion Board
- Operating Voltage (VDC): 6 ~ 26 (match this to your power supply; too high a voltage can damage the part)
- GPIO Used: LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22 (your supply must deliver at least this much current)
- Additional Specs.: Analog Audio Output Level: 2V RMS
- Headphone Max Output Power: 142mW at 16Ω
- Amplifier Type: 2×30W at 8Ω BTL Load at 24Vdc, Max Output Power (your supply must deliver at least this much current)
- Sampling Rate: pto 24bit / 192KHz (Raspberry Pi I2S) (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Full-HD audio – up to 24-bit/192kHz playback
- Audiophile TI Burr-Brown 32-bit/384kHz DAC (TI PCM5122)
- Class-leading audio; 112db SNR, and THD of 0.0019%
- Built-in High-quality Class-D stereo audio amplifier (TI TPA3118D2)
- Up to 2×30W Into an 8-Ω BTL Load at 24Vdc
- Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
- Built-in high-quality audio headphone amplifier (TI TPA6133A)
- Uses the Texas Instruments ultra-low-noise voltage regulator (output noise< 10μVRMS)
- Uses the Texas Instruments high-efficiency step-down DC converter (up to 95%)
- 6V~26Vdc converted to 5.1V, 3A to power the Raspberry Pi
- Uses the genuine ALPS RK163 series potentiometer for smooth volume adjustment
- Built-in high-quality IR sensor (Vishay -the world's leading supplier of infrared receivers)
- Onboard RCA connectors
- Onboard 3.5mm stereo headphone jack
- Onboard speaker & power screw terminals
- Onboard 4pin PH2.0 connector allowing to connect an external lighted power switch to control power
- Onboard gold-plated high-current DC power jack (5.5x2.5mm)
Package Includes:
1 x Raspberry Pi X400 Multifunctional Expansion Board
1 x Set of brass standoffs and screws
Quick specs
- Item Type
- Other Board
- Board Type
- Expansion Board
- Operating Voltage (VDC)
- 6 ~ 26
- GPIO Used
- LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
- Additional Specs.
- Analog Audio Output Level: 2V RMS
- Headphone Max Output Power
- 142mW at 16Ω













