
1 / 3 · Click to enlarge
AI Summary
The Red PBS-110 is a compact 2-pin momentary push button switch with a 7mm threaded body and normally closed (press off) operation. It installs easily in a 6.8mm panel hole and is rated for low-power switching up to 3A at 125V AC.
Key Highlights
- Normally closed (NC) momentary action: press to open circuit, release to close
- Compact 2-pin design with copper feet for easy soldering
- 7mm threaded body fits a 6.8mm mounting hole
- Bright red actuator for quick visual identification
- Rated 3A at 125V AC and 1A at 250V AC
- Tool-free installation and easy replacement
Ideal For
- Electronics hobbyists building custom control panels
- Makers working on DIY projects requiring momentary switches
- Technicians repairing small appliances
- Students learning about electrical circuits
- Model builders needing compact push buttons
Buying Tip
Check that your project requires a normally closed (press off) switch, as this is the opposite of the more common normally open type.
Elecvora expert review
Our verdict
The Red PBS-110 is a straightforward, reliable momentary switch for low-power applications. Its normally closed operation and compact size make it a practical choice for specific control tasks, though users must ensure it suits their circuit logic.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear normally closed operation with self-reset
- Easy panel mounting with standard 6.8mm hole
- Compact and lightweight
- Solder-friendly copper feet
Cons
- Limited to low-power circuits (max 3A at 125V AC)
- Normally closed type may not suit all applications
- No mounting nut specified in package
Best for
Low-power momentary cut-off or signaling in DIY electronics and control panels
Not ideal for
High-power switching or applications requiring normally open contacts
Specifications
| Model No. / Name | PBS 110 |
|---|---|
| Color | Red, Silver |
| Current Rating (A) | 3A/125V, 1A/250V |
| Switch Type | Normal Close(Press off) |
| No. of Pins | 2 |
| Mounting Hole Diameter (mm) | 6.8 |
| Material | Copper foot |
| Length (mm) | 27 |
| Width (mm) | 9.8 |
| Weight (g) | 03 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x Red PBS-110 2Pin 7mm Thread Momentary Self-Reset Push Button Switch
Frequently Asked Questions
What does 'normally closed' mean?
What is the maximum voltage and current this switch can handle?
What size hole do I need to mount this switch?
Is this switch momentary or latching?
What is included in the package?
Can I use this switch for AC and DC circuits?
Overview
The Red PBS-110 is a momentary push button switch built for low-power electrical control. Its normally closed (NC) configuration means the circuit remains complete until the button is pressed, at which point the contact opens and interrupts the current. When you release the button, the circuit closes again automatically. This self-reset action makes it ideal for temporary cut-off or signaling functions in compact electronic assemblies.
Key Features
- Momentary NC operation: Press to break the circuit, release to restore it.
- Compact 2-pin design: Simple two-terminal connection with copper feet for soldering.
- 7mm threaded body: Secures into a 6.8mm panel opening for a stable fit.
- Red actuator: High-visibility color for easy identification in control panels.
- Tool-free installation: Easy to mount and replace without special tools.
Specifications Explained
Current rating: 3A at 125V AC and 1A at 250V AC. These ratings indicate the maximum load the switch can handle safely in low-power AC circuits. Always stay within these limits to ensure reliable performance.
Switch type: Normally closed (press off). This means the default state is closed (circuit connected), and actuation opens the circuit. It is the opposite of a normally open (NO) switch, so consider your circuit logic before choosing.
Mounting: The 6.8mm mounting hole diameter and 7mm threaded body allow the switch to be inserted into a panel and secured with a nut (if included) or simply pressed into a snug hole. The compact dimensions of 27mm length and 9.8mm width make it suitable for tight spaces.
Materials: Copper feet provide good conductivity and solderability. The red plastic actuator and silver-toned body offer durability for general use.
Compatibility and Requirements
This switch is designed for panel mounting in a 6.8mm hole. It requires soldering or wire connection to the two pins. No additional hardware is specified beyond what is included. Ensure your circuit voltage and current do not exceed the switch ratings.
Typical Uses
- DIY electronics projects and breadboard prototypes
- Control panels for small appliances
- Repair or replacement of existing push buttons
- Signal switching in low-power circuits
- Custom enclosures and model-making
What's in the Box
1 x Red PBS-110 2Pin 7mm Thread Momentary Self-Reset Push Button Switch
Quick specs
- Model No. / Name
- PBS 110
- Color
- Red, Silver
- Current Rating (A)
- 3A/125V, 1A/250V
- Switch Type
- Normal Close(Press off)
- No. of Pins
- 2
- Mounting Hole Diameter (mm)
- 6.8













