Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A nine-layer red and black acrylic case for the Raspberry Pi 4B that protects the board while keeping ports and GPIO accessible. It accepts 3007 or 3010 cooling fans, so you can add active airflow to demanding builds.

Key Highlights

  • Nine stacked acrylic layers for a rigid, see-through enclosure
  • Red and black finish keeps internal components easy to inspect
  • Accepts 3007 and 3010 cooling fans for active airflow
  • Precise cutouts for GPIO, USB, HDMI, power and camera or display
  • Screw-mounted modular assembly opens easily for maintenance
  • Compact footprint of 94 x 70 x 25 mm at about 62 g

Ideal For

  • Raspberry Pi 4B owners adding active cooling
  • Makers building robotics and automation projects
  • DIY IoT developers needing a visible enclosure
  • Bench testers who inspect wiring often
  • Hobbyists who prefer screw-together modular cases

Buying Tip

Confirm your fan is a 3007 or 3010 size before ordering, since the case provides the fan mounting position but no fan.

Elecvora expert review

Our verdict

A sensible low-cost enclosure for Pi 4B users who want visibility and fan-ready cooling without a sealed plastic box. The stacked acrylic design is easy to service, though it is a DIY kit rather than a finished plug-and-play shell.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Nine-layer acrylic frame is rigid and see-through
  • Supports 3007 and 3010 fans for active cooling
  • Cutouts keep GPIO and main ports reachable
  • Screw-mounted layers are simple to open and rebuild

Cons

  • Fan and Raspberry Pi board are not included
  • Acrylic surfaces can scratch and need gentle handling
  • Assembly is manual and takes some patience

Best for

Makers who want a visible, fan-ready Pi 4B case

Not ideal for

Users wanting a sealed, tool-free enclosure

Specifications

Shipping Weight0.07 kg
Shipping Dimensions11 × 8 × 4 cm

What's in the box

  • 1 x Red and Black Acrylic Multilayer 9 Layer Case for Raspberry Pi 4B Supporting 3007/3010 Fans

Frequently Asked Questions

Which Raspberry Pi model does this case fit?
It is designed for the Raspberry Pi 4 Model B. The cutouts are positioned for that board's ports and connectors.
Are cooling fans included?
No. The case supports 3007 and 3010 fans, but the fan itself must be supplied separately.
Do I need tools to assemble it?
Yes. The layers are screw-mounted, so basic hand tools are needed to fasten and later open the case.
Can I reach the GPIO pins with the case closed?
Yes. The design includes access cutouts for GPIO as well as USB, HDMI, power and camera or display connections.
How large is the assembled case?
It measures approximately 94 x 70 x 25 mm and weighs about 62 g.
How should I clean the acrylic?
Wipe the panels with a soft, slightly damp cloth and avoid abrasive cleaners, which can dull or scratch the surface.

Overview

This acrylic case is built for the Raspberry Pi 4 Model B and uses a nine-layer stacked construction instead of a single moulded shell. Each acrylic layer adds stiffness, and the open, transparent sides let you see the board, wiring and cooling setup at a glance. The red and black colour combination separates the frame from the panels, which makes the internal layout easier to read during assembly and troubleshooting.

The enclosure measures approximately 94 x 70 x 25 mm and weighs about 62 g, so it adds little bulk to a desk build or a project box. Assembly is screw-mounted and modular, meaning the layers are held together with screws and can be separated again when you need to reach the board.

Key Features

  • Nine-layer stack: multiple acrylic sheets form a strong frame with visible internals.
  • Fan-ready top: supports 3007 and 3010 cooling fans for active airflow.
  • Access cutouts: openings for GPIO, USB, HDMI, power and camera or display interfaces.
  • Screw-mounted build: modular layers fasten together and come apart for servicing.
  • Red and black finish: a two-tone look that highlights the board inside.

Specifications Explained

The nine-layer structure is the defining feature. Rather than a solid box, the case is assembled from stacked acrylic plates, which gives the sides and top rigidity while leaving gaps that help air move through the enclosure. That matters when a fan is fitted, because air can enter and exit instead of being trapped.

Fan support for 3007 and 3010 sizes means the case is prepared for small active coolers in those dimensions. You choose and supply the fan separately; the case provides the mounting position. The 94 x 70 x 25 mm dimensions describe the assembled enclosure, and the 62 g weight reflects the acrylic layers and hardware.

Compatibility and Requirements

The case is designed for the Raspberry Pi 4 Model B. Port cutouts cover GPIO, USB, HDMI, power and camera or display connections. Cooling fans in 3007 or 3010 format are supported but not included. Assembly requires the screw hardware supplied with the case and basic hand tools.

Typical Uses

Use it for desktop Pi setups where you want to see status LEDs and wiring, for robotics builds that need a protected board with airflow, or for DIY IoT nodes that run continuously. The open acrylic design also suits bench testing, since you can inspect connections without fully dismantling the enclosure.

What's in the Box

One red and black acrylic multilayer nine-layer case for Raspberry Pi 4B with 3007/3010 fan support. The Raspberry Pi board and cooling fans are not included.

Quick specs

Shipping Weight
0.07 kg
Shipping Dimensions
11 × 8 × 4 cm
See all specifications