Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 10-pack of 2×14mm normally open reed switches provides reliable non-contact magnetic sensing for DIY electronics, RC, and FPV projects. Each switch handles temperatures from -50°C to 140°C and offers low contact resistance for dependable switching.

Key Highlights

  • 10 normally open reed switches per pack
  • Compact 2mm diameter by 14mm length
  • Wide -50°C to 140°C operating range
  • Low 20mΩ contact resistance
  • 100,000 electrical lifecycles
  • Solderable pins for direct circuit connection

Ideal For

  • DIY electronics hobbyists building magnetic sensors
  • RC enthusiasts adding position or limit detection
  • FPV pilots creating custom switch interfaces
  • Makers designing non-contact safety interlocks
  • Students learning about magnetic switching

Buying Tip

Remember to order a small magnet separately if you don't already have one, as these switches need a magnetic field to operate.

Elecvora expert review

Our verdict

These reed switches are a practical, low-cost solution for non-contact magnetic sensing in hobbyist and light industrial projects. Their wide temperature range and reliable construction make them a versatile addition to any parts bin.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very compact size fits tight spaces
  • Operates across a wide temperature range
  • Low contact resistance for minimal signal loss
  • Long lifecycle reduces replacement frequency

Cons

  • Requires a separate magnet to operate
  • Glass envelope is fragile and needs careful handling
  • Not suitable for high-power switching without a relay

Best for

DIY electronics and RC projects needing simple magnetic detection

Not ideal for

High-current or high-voltage switching applications

Specifications

Model No. / NameReed Switch
Frequency (Hz)100
Mech. Electrical Lifecycle≈ 100,000
Contact Resistance (ohm)20mΩ
Insulation Resistance (MOhm)100
Operating Temperature (°C)-50 to 140
Length (mm)14
Width (mm)2 (Body Diameter)
Weight (g)1 (approx) (each)
Shipping Weight0.03 kg
Shipping Dimensions4 × 4 × 1 cm

What's in the box

  • 10 × Reed Switch 2×14mm Normally Open Magnetic Sensor

Frequently Asked Questions

Do these reed switches come with magnets?
No, the package includes only the reed switches. You will need to supply a suitable magnet separately.
What is the maximum switching voltage and current?
The product data does not specify voltage or current ratings beyond the contact resistance and lifecycle. For safety, use them only in low-power circuits unless you consult the manufacturer's datasheet.
Can I use these with a microcontroller like Arduino?
Yes, they can be connected to a microcontroller's digital input with a pull-up or pull-down resistor, but ensure the switching voltage and current are within safe limits for your board.
Are the switches normally open or normally closed?
These are normally open (NO) switches, meaning the circuit is open when no magnetic field is present.
How do I connect the switch in a circuit?
Solder the two leads in series with the load and power source. The switch is not polarised, so orientation does not matter.
What is the operating temperature range?
The switches are rated for -50°C to 140°C, making them suitable for extreme environments.

Overview

This set includes ten normally open reed switches, each encapsulated in a glass tube measuring 2mm in diameter and 14mm long. Inside, two ferrous pins are separated by a small gap. When a magnetic field is brought near, the pins attract and close the circuit. Removing the magnet causes the pins to spring apart, opening the circuit again. This non-contact operation makes reed switches ideal for applications where a mechanical switch would wear out or where physical isolation is needed.

Key Features

  • Normally open contact – the switch remains open until a magnet is present, then closes.
  • Compact size – 2mm body diameter and 14mm length fit tight spaces.
  • Wide temperature range – operates from -50°C to 140°C, suitable for extreme environments.
  • Low contact resistance – 20mΩ ensures minimal voltage drop.
  • High insulation resistance – 100MΩ provides reliable isolation when open.
  • Long lifecycle – rated for approximately 100,000 electrical operations.

Specifications Explained

Frequency (100Hz): The switch can handle up to 100 switching cycles per second, adequate for most sensing and control tasks.

Contact resistance (20mΩ): When closed, the switch adds very little resistance, so it won't significantly affect low-power circuits.

Insulation resistance (100MΩ): When open, the switch blocks current effectively, preventing leakage.

Operating temperature (-50°C to 140°C): The glass-to-metal seal and materials withstand both freezing and high-heat conditions, making the switch reliable in outdoor enclosures, automotive bays, or industrial settings.

Mechanical/electrical lifecycle (≈100,000): Expect around 100,000 operations before contact wear may affect performance, which is ample for typical hobby and prototyping use.

Compatibility and Requirements

These reed switches are passive components that require an external magnet to actuate. They can be soldered directly into circuits or used with a breadboard via suitable headers. No additional driver circuitry is needed for basic switching, but the switch must be paired with a magnet (not included) to function. The pins are compatible with standard soldering tools and prototyping boards.

Typical Uses

  • Door and window open/close detection
  • Position sensing in RC models and robotics
  • DIY magnetic switches for custom controllers
  • Speed sensing on rotating wheels with a magnet
  • Safety interlocks in enclosures

What's in the Box

10 × Reed Switch 2×14mm Normally Open Magnetic Sensor.

Quick specs

Model No. / Name
Reed Switch
Frequency (Hz)
100
Mech. Electrical Lifecycle
≈ 100,000
Contact Resistance (ohm)
20mΩ
Insulation Resistance (MOhm)
100
Operating Temperature (°C)
-50 to 140
See all specifications