
At a glance
This ir and rf transmitters and receivers is a good fit for makers, students and electronics hobbyists. Main specs: item type Wireless Module; operating frequency (mhz) 433; rated voltage (vdc) 3.3. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Wireless connection
- Item Type: Wireless Module
- Operating Frequency (MHz): 433
- Rated Voltage (VDC): 3.3
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Wireless Module |
|---|---|
| Operating Frequency (MHz) | 433 |
| Rated Voltage (VDC) | 3.3 |
| Bit Rate(kbps) | 300 |
| Sensitivity (dBm) | Down to -144 dBm |
| Length (mm) | 15 |
| Width (mm) | 15 |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 7 × 4 × 1 cm |
Overview
The RFM96W 433mhz Wireless Receiving Module(Only 433mhz) is listed in our ir and rf transmitters and receivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Wireless Module
- Operating Frequency (MHz): 433 (make sure the rest of your system works at this frequency)
- Rated Voltage (VDC): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Bit Rate(kbps): 300
- Sensitivity (dBm): Down to -144 dBm
- Length (mm): 15 (measure your mounting space before ordering)
- Width (mm): 15 (measure your mounting space before ordering)
- Weight (g): 3 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The LoRaTM long-range modem in the RFM96 transceivers provides ultra-long range spread spectrum communication and high interference immunity while consuming minimal current. RFM96 can achieve a sensitivity of over -148dBm using HopeRF's patented LoRaTM modulation technique and a low-cost crystal and bill of materials.
The combination of high sensitivity and an integrated +20 dBm power amplifier results in an industry-leading link budget, making it ideal for any application requiring range or robustness. Over traditional modulation techniques, LoRaTM provides significant advantages in both blocking and selectivity, resolving the traditional design compromise between range and selectivity.
Applications:
- Automated Meter Reading.
- Home and Building Automation.
- Wireless Alarm and Security Systems.
- Industrial Monitoring and Control
- Long-range Irrigation Systems
Features:
- LoRaTM Modem.
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs. V supply.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery
Package Includes:
1 x RFM96W 433mhz WirelessReceiving Module(Only 433mhz)Quick specs
- Item Type
- Wireless Module
- Operating Frequency (MHz)
- 433
- Rated Voltage (VDC)
- 3.3
- Bit Rate(kbps)
- 300
- Sensitivity (dBm)
- Down to -144 dBm
- Length (mm)
- 15













