Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SA5, this electronics is a good fit for everyday home and hobby use. Main specs: input frequency range 100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled; input attenuation Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active; maximum dc input ±5V DC.

Key Highlights

  • Input Frequency Range: 100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled
  • Input Attenuation: Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active
  • Maximum DC Input: ±5V DC

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Input Frequency Range100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled
Input Impedance50 ohm when input attenuation set to 10dB or more
Input AttenuationSelectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active
Maximum DC Input±5V DC
Absolute Maximum Input Level+6dBm with 0dB internal attenuation
Absolute Maximum Short-Term Peak Input Power+20dBm with 30dB internal attenuation
Suggested Maximum Input Power+0dBm with internal attenuation in automatic mode
Best Measurement Input PowerBelow -25dBm
Input Intercept Point (IIP3)+15dBm with 0dB internal attenuation
1dB Compression Point-1dBm with 0dB internal attenuation
Power Detector Resolution0.5dB
Linearity vs Frequency±2dB below 5.3GHz, ±5dB between 5.3GHz and 6GHz
Absolute Power Level Accuracy±2dB after power level calibration
Built-in Optional LNA20dB LNA with Noise Figure of 5dB
Lowest Discernible Signal without LNA-102dBm at 30MHz using a resolution bandwidth of 30kHz
Lowest Discernible Signal with LNA-145dBm at 30MHz using a resolution bandwidth of 200Hz
Frequency AccuracyEqual to the selected resolution bandwidth
Phase Noise-108dB/Hz at 100kHz offsetand -115dB/Hz at 1MHz offset@ 30MHz
Spur-Free Dynamic Range70dB when using a 30kHz resolution bandwidth
Resolution Filters0.2, 1, 3, 10, 30, 100, 300, 600, and 850 kHz
On-Screen Resolution51, 101, 145, 290, or 450 measurement points
Scanning SpeedOver 1000 points/second using largest resolution filters
Automatic Optimization of Scanning PointsEnsures coverage of the whole scan range regardless of the chosen resolution bandwidth
Spur Suppression OptionFor assessing if certain signals are internally generated or actually present in the input signal
Headphone OutputFor listening to the demodulated audio (AM only). Stereo connector only, high impedance is louder, short protected

Overview

The SA5 PORTXVNSA 4 inch IPS LCD Multi-function Handheld Spectrum Analyzer 100k-5.3GHz Signal Generator Spectrum Analysis Measuring, made by SA5, is listed in our electronics range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Input Frequency Range: 100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled (quoted range is usually line-of-sight; walls and interference shorten it)
  • Input Impedance: 50 ohm when input attenuation set to 10dB or more
  • Input Attenuation: Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active
  • Maximum DC Input: ±5V DC
  • Absolute Maximum Input Level: +6dBm with 0dB internal attenuation
  • Absolute Maximum Short-Term Peak Input Power: +20dBm with 30dB internal attenuation
  • Suggested Maximum Input Power: +0dBm with internal attenuation in automatic mode
  • Best Measurement Input Power: Below -25dBm

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


>>>Firmware: Click here to open<<<


SA5 Product Features: Screen Size: 4 inches IPS LCD, featuring a large knob for easy operation. Spectrum Analyzer: Normal mode:0.1-800MHz, Ultra mode:provides level calibration up to 5.3GHz, and can observe signals up to 12GHz. Signal Generator: Outputs sine waves between 0.1-800MHz, square waves up to 4.4GHz, or RF test signals up to 5.3GHz when not used as a spectrum analyzer. Switchable resolution bandpass filters: from 200Hz to 850kHz. Optional LNA: Built-in 20dB Low Noise Amplifier (LNA). Spectrum Display: Display up to 450 points, Display four independently configured trace Storage: MicroSD card slot for storing measurements, settings, and screen captures(SD card Not includes).

Input Attenuator: Step attenuator adjustable from 0dB to 31dB (not usable with LNA). Calibration: Includes a built-in calibration signal generator for automatic self-test and input calibration. PC Connectivity: Connects via USB to function as a PC-controlled spectrum analyzer or signal generator. Battery: 5000mA, Rechargeable battery providing at least 10 hours of portable use. Max Input Level: +10dBm. Ensure not to exceed this to avoid damage.


 

 

Package includes:


1 x 100k-5.3GHz Signal Generator



Product Safety Information

Quick specs

Input Frequency Range
100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled
Input Impedance
50 ohm when input attenuation set to 10dB or more
Input Attenuation
Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active
Maximum DC Input
±5V DC
Absolute Maximum Input Level
+6dBm with 0dB internal attenuation
Absolute Maximum Short-Term Peak Input Power
+20dBm with 30dB internal attenuation
See all specifications