
1 / 3 · Click to enlarge
AI Summary
Samsung A Grade INR 18650-25R 2S1P Li-Ion pack delivers 7.4V 2500mAh with 8C continuous discharge and built-in BMS. Compact and lightweight, it includes JST XH charge and Amass T discharge connectors for RC and drone use.
Key Highlights
- 7.4V nominal voltage with 2500mAh capacity for steady power
- 8C continuous discharge supports high-current RC and drone applications
- Built-in BMS protects against overcharge, over-discharge, and short circuits
- 3-pin JST XH charge connector and Amass Nylon T discharge port
- Compact 70 x 20mm size and approximately 125g weight
- 4C charging current enables fast recharge times
Ideal For
- RC car and truck enthusiasts needing a compact 2S pack
- Drone and FPV pilots building lightweight 7.4V setups
- DIY electronics hobbyists requiring a protected Li-Ion pack
- Portable device makers looking for high-discharge cells
- Model boat and aircraft builders seeking reliable power
Buying Tip
Verify that your device uses an Amass T-plug discharge connector and that your charger supports 2S Li-Ion packs with a JST XH balance plug before purchasing.
Elecvora expert review
Our verdict
This Samsung 2S1P pack offers a solid balance of capacity, discharge rate, and safety features for its size. The built-in BMS and quality cells make it a dependable choice for RC and portable applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 8C continuous discharge for demanding loads
- Integrated BMS for protection
- Fast 4C charging capability
- Compact and lightweight design
- Genuine Samsung cells
Cons
- Requires a compatible Li-Ion charger with JST XH plug
- Discharge connector is Amass T-plug; may need adapter for some devices
- Not suitable for applications requiring more than 2S voltage
Best for
RC hobbyists and drone builders needing a compact, high-discharge 2S Li-Ion pack
Not ideal for
Users needing higher voltage or capacity beyond 2500mAh
Specifications
| Nominal Voltage (V) | 7.4 |
|---|---|
| Nominal Capacity (mAh) | 2500 mAh |
| Continuous Discharge Current (A) | 8C |
| BMS (Y/N) | Y |
| Charge Connector | 3 Pin JST XH |
| Discharge Port | Amass Nylon T |
| Max. Charging Voltage (V) | 8.4 |
| Max. Discharging Voltage (V) | 5.8 |
| Charging Current | 4C |
| Length (mm) | 70 |
| Width (mm) | 20 |
| Weight (g) | ~125 |
| Model Series | 2 |
| Shipping Weight | 0.127 kg |
| Shipping Dimensions | 12 × 10 × 3 cm |
What's in the box
- 1 x Samsung A Grade INR 18650-25R 7.4V 2500mAh 8C 2S1P Li-Ion Battery Pack
Frequently Asked Questions
What devices can I use this battery pack with?
How do I charge this battery pack?
What is the maximum continuous discharge current?
Does this pack have built-in protection?
What is included in the package?
How should I store the battery when not in use?
Overview
The Samsung A Grade INR 18650-25R 7.4V 2500mAh 8C 2S1P Li-Ion Battery Pack is a compact power solution for RC enthusiasts, drone builders, and portable electronics projects. Using genuine Samsung 18650-25R cells arranged in a 2S1P configuration, it provides a nominal 7.4V output with a capacity of 2500mAh. The integrated battery management system (BMS) adds a layer of safety by monitoring the pack during charge and discharge. With an 8C continuous discharge rating, this pack can deliver high current bursts for demanding applications, while the 4C charging capability allows for quick turnaround times. Measuring just 70mm long and 20mm wide, and weighing around 125g, it fits easily into tight spaces.
Key Features
- High discharge rate: 8C continuous discharge supports power-hungry devices.
- Built-in BMS: Helps prevent overcharging, over-discharging, and short circuits.
- Fast charging: 4C charging current reduces downtime.
- Quality cells: Samsung A Grade INR 18650-25R cells for reliable performance.
- Ready connectors: 3-pin JST XH for charging and Amass Nylon T for discharge.
- Compact and lightweight: 70 x 20mm, ~125g.
Specifications Explained
Nominal Voltage (7.4V): This is the average voltage during discharge, suitable for 2S applications. Capacity (2500mAh): Indicates the total charge the pack can store; higher capacity means longer runtime for a given load. Continuous Discharge Current (8C): The pack can safely deliver current up to 8 times its capacity (20A) continuously, making it suitable for high-drain devices. BMS: The built-in protection circuit safeguards the cells. Charge Connector (3-pin JST XH): Standard connector for balance charging. Discharge Port (Amass Nylon T): Durable T-plug for main power output. Max Charging Voltage (8.4V): Do not exceed this voltage during charging. Max Discharging Voltage (5.8V): Avoid discharging below this level to prevent damage. Charging Current (4C): Supports charging at up to 10A (4 x 2500mA), enabling fast recharge. Dimensions and Weight: 70mm length, 20mm width, ~125g weight.
Compatibility and Requirements
This battery pack is designed for devices that accept a 2S Li-Ion pack with a 7.4V nominal voltage. The discharge port is an Amass Nylon T connector, so your device or ESC should have a matching T-plug. Charging requires a compatible Li-Ion charger with a 3-pin JST XH balance connector and the ability to charge to 8.4V. Always use a charger designed for 2S Li-Ion packs and never exceed the maximum charging voltage. Ensure your application does not draw more than 8C continuous current.
Typical Uses
This pack is ideal for RC cars, boats, drones, FPV setups, and portable electronic projects that require a compact 7.4V power source with high discharge capability. It can also be used in custom builds where a 2S Li-Ion pack with BMS protection is needed.
What's in the Box
1 x Samsung A Grade INR 18650-25R 7.4V 2500mAh 8C 2S1P Li-Ion Battery Pack







Quick specs
- Nominal Voltage (V)
- 7.4
- Nominal Capacity (mAh)
- 2500 mAh
- Continuous Discharge Current (A)
- 8C
- BMS (Y/N)
- Y
- Charge Connector
- 3 Pin JST XH
- Discharge Port
- Amass Nylon T


















