Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
SATA3.0 to M.2 B-Key, NGFF SSD Conversion, Card — image 1
Hover to zoom

SATA3.0 to M.2 B-Key, NGFF SSD Conversion, Card

5.01 rating
386+ bought in past month
AI Summary
USB Interface Module for everyday users

The SATA3.0 to M.2 B-Key, NGFF SSD Conversion, Card is a value-for-money usb interface module designed for everyday users. It features Compatibility: Windows 98 / SE / ME / 2000 / XP / Vista / 7 / 8 / Linux / Mac OS 8.6 and Weight (g): 15.75.

₹1,020
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,020
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Compatibility: Windows 98 / SE / ME / 2000 / XP / Vista / 7 / 8 / Linux / Mac OS 8.6
Weight (g): 15.75
Dimensions (L x W x H) mm: 100 x 70 mm
Shipping Weight: 0.15 kg
Shipping Dimensions: 12 × 10 × 4 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-1121407Category: USB Interface Module

About This Product

The SATA3.0 to M.2 B-Key, NGFF SSD Conversion, Card is a value-for-money usb interface module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Compatibility: Windows 98 / SE / ME / 2000 / XP / Vista / 7 / 8 / Linux / Mac OS 8.6
  • Weight (g): 15.75
  • Dimensions (L x W x H) mm: 100 x 70 mm
  • Shipping Weight: 0.15 kg
  • Shipping Dimensions: 12 × 10 × 4 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

SATA3.0 to M.2 B-Key NGFF SSD Conversion Card is used for Converting mSATA/M.2 SSD to SATA in the computer, using SATA III chipset it provides fast operation. Its Applicable hard drives and interfaces is: M.2 NGFF supports 2242 / 2260 / 2280 mmn gff m 2 SSD solid-state drives. MSATA supports 30 x 50 mm MSATASSD solid state drives. Usage method: Install M.2 NGFF or mSATA SSD, lock the screws, install 2.5inch hard drive box or connect SATA cable to experience extreme pleasure. It is Compatible operating system: Windows 98 / SE / ME / 2000 / XP / Vista / 7 / 8 / Linux / Mac OS 8.6 or later.  

Package Includes:

1 x SATA3.0 to M.2 B-Key NGFF SSD Conversion Card

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.