Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This other esp wifi modules is a good fit for makers, students and electronics hobbyists. Main specs: frequency bandwidth (ghz) 2.4 GHz to 2.5 GHz; interface type Serial; max. supply voltage (v) 3.6 V. Check that your power source supplies 3 V before connecting it.

Key Highlights

  • Frequency Bandwidth (GHz): 2.4 GHz to 2.5 GHz
  • Interface Type: Serial
  • Max. Supply Voltage (V): 3.6 V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Frequency Bandwidth (GHz)2.4 GHz to 2.5 GHz
Data Transfer Rate11 Mb/s, 54 Mb/s
Interface TypeSerial
Output19 dBm
Min Supply Voltage3 V
Max. Supply Voltage (V)3.6 V
Transmit Supply Current210 mA, 230 mA
Receive supply current110 mA
Operating Temperature Min- 40 C
Operating Temperature (°C)+ 85 C
Antenna Connector TypePCB
Power Supply Voltage (V)3 V to 3.6 V
Model No. / NameWiFi Modules
WiFi ProtocolWiFi
Shipping Weight0.004 kg
Shipping Dimensions14 × 9 × 1 cm

Overview

The Seeed Studio Grove UART WizFi360 is listed in our other esp wifi modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Frequency Bandwidth (GHz): 2.4 GHz to 2.5 GHz (make sure the rest of your system works at this frequency)
  • Data Transfer Rate: 11 Mb/s, 54 Mb/s
  • Interface Type: Serial (confirm your cable or board uses the same connector)
  • Output: 19 dBm
  • Min Supply Voltage: 3 V (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 3.6 V (match this to your power supply; too high a voltage can damage the part)
  • Transmit Supply Current: 210 mA, 230 mA (your supply must deliver at least this much current)
  • Receive supply current: 110 mA (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Grove UART WizFi360 is based on Wiznet's wizfi360 Wi-Fi module, which is a cost-effective WiFi module that supports both TCP/IP and microcontroller and multiple modes.

Grove UART WizFi360 is based on Wiznet's wizfi360 Wi-Fi module. It is a microcontroller that supports both TCP/IP and microcontrollers. It takes only a few lines of code to allow your microcontroller to interact with WiFi networks. Each WizFi360 module is pre-installed AT command set firmware, which means you can send simple text commands to control the device. And with connectivity provided through a 2.4GHz wireless connection, as well as WizFi360's compatibility with IEEE802.11 b/g/n standards and support for SoftAP, StaTIon, and SoftAP+StaTIon modes. Grove UART WizFi360 saves a lot of time by being a standalone Internet support solution.


Features:

  1. Compatible with multiple modes: Support SoftAP/Station/SoftAP+Station mode and TCP Server / TCP Client / UDP operating mode
  2. Efficient matching network: Support auto 20MHz / 40MHz bandwidth, UART to WIFI two-way transparent transmission function can enable users to quickly network
  3. Secure communication guarantee: Support WPA_PSK / WPA2_PSK encryption that provides privacy and security for data communication over the network.
  4. View network status in real-time: The keep-alive and 'ping' commands allow you to monitor the TCP connection and the current network state.
  5. Easy to use: Just a fast & simple plug-and-play device that allows you to easily add wireless capabilities.
  6. High compatible baud rate: Serial port baud rate up from 600bps to 2Mbps with 16 common values

Package Includes:

1 x Seeed Studio Grove UART WizFi360

Quick specs

Frequency Bandwidth (GHz)
2.4 GHz to 2.5 GHz
Data Transfer Rate
11 Mb/s, 54 Mb/s
Interface Type
Serial
Output
19 dBm
Min Supply Voltage
3 V
Max. Supply Voltage (V)
3.6 V
See all specifications