Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact Sentek plunger door contact switch with a 3/4 inch flush plunger and pre-attached 18 inch #22AWG leads. It provides simple open/closed position sensing for doors, panels and enclosures in low-voltage wiring projects.

Key Highlights

  • Flush-type plunger with a 3/4 inch diameter body
  • Standard 18 inch #22AWG leads pre-attached for wiring
  • Available in white or brown to suit the installation
  • Terminal block version BR-1033T offered separately
  • Compact form factor suits tight door frames and housings
  • Straightforward fit for low-voltage position sensing

Ideal For

  • Electronics hobbyists building door or cabinet contact sensors
  • Technicians replacing a worn plunger switch in an enclosure
  • Makers adding position sensing to panels and lids
  • Repairers working on low-voltage signal wiring
  • Installers who prefer pre-attached leads over terminals

Buying Tip

Measure your existing mounting hole and confirm the 3/4 inch body and 18 inch lead length suit your layout before ordering, and check the datasheet for electrical ratings.

Elecvora expert review

Our verdict

The Sentek BR-1033 is a tidy, no-fuss plunger contact for low-voltage position sensing, with pre-attached leads that speed up installation. It is best treated as a simple mechanical component whose electrical limits you confirm from the datasheet first.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 3/4 inch body fits tight frames
  • Pre-attached 18 inch #22AWG leads save wiring time
  • White and brown colour options
  • Terminal block variant available as BR-1033T

Cons

  • Electrical ratings are not stated in the supplied data
  • Mounting hardware is not listed as included
  • Plunger travel must be matched to the door or panel

Best for

Low-voltage door, panel and enclosure position sensing

Not ideal for

Applications needing documented high-power switching ratings without a datasheet check

Specifications

ManufacturerSentek
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x BR-1033-Sentek-Door Contact Push Button Switch

Frequently Asked Questions

Does this switch need its own power supply?
No. It is a passive contact switch that opens or closes a circuit you provide, so it does not draw power on its own.
What are the lead length and wire gauge?
The switch comes with standard 18 inch leads in #22AWG, which suits low-voltage signal wiring.
What size hole does it fit?
The switch body has a 3/4 inch diameter, so check your mounting hole or bracket against that figure.
Is a terminal block version available?
Yes. The BR-1033T is the terminal block variant, while the BR-1033 uses pre-attached leads.
What colours can I choose?
The switch is offered in white or brown to match common door and frame finishes.
Are mounting screws included?
The supplied data lists only the switch itself, so mounting hardware should be sourced separately if needed.

Overview

The Sentek BR-1033 is a door contact push button switch built around a flush-type plunger. When a door, panel or lid presses against the plunger, the switch changes state, giving you a simple way to sense whether an opening is closed or open. The 3/4 inch diameter body keeps the footprint small, so it can sit inside narrow frames and compact enclosures without crowding the surrounding hardware.

Each unit comes with standard 18 inch #22AWG leads already attached. That saves time during installation, since you can route the wiring directly to your circuit instead of sourcing and crimping terminals first. The switch is available in white or brown, letting you match common door and frame finishes more closely.

Key Features

  • Flush plunger design: the actuator sits close to the body for a neat, low-profile fit.
  • 3/4 inch diameter: a compact size that suits tight mounting locations.
  • 18 inch #22AWG leads: pre-attached wiring ready for your circuit.
  • Colour options: white or brown to blend with the installation.
  • Terminal block variant: the BR-1033T is available for screw-terminal connections.

Specifications Explained

The 3/4 inch diameter refers to the switch body, which is the figure to check against your drilled hole or mounting bracket. The flush plunger means the moving part does not protrude far, so the door or panel only needs a small amount of travel to actuate it.

The 18 inch #22AWG leads describe both the wire length and gauge. Twenty-two AWG is a thin conductor suited to low-voltage signal wiring, and the 18 inch length gives enough slack to reach a nearby junction or controller. If your project needs a different lead length, special leads are noted as available from the manufacturer, and the BR-1033T offers a terminal block instead of flying leads.

Compatibility and Requirements

This is a passive contact switch, so it does not need its own power supply; it simply opens or closes a circuit that you provide. Electrical ratings, contact configuration and switching capacity are not listed in the supplied product data, so confirm those details against the manufacturer datasheet before connecting the switch to any circuit. Choose the white or brown finish to suit your door or frame, and select the BR-1033T if you prefer terminal block wiring.

Typical Uses

  • Sensing whether a door or cabinet is open or closed
  • Panel and enclosure position detection
  • Low-voltage signal wiring in DIY and repair projects
  • Replacement of a worn plunger contact of similar size

What's in the Box

One BR-1033-Sentek-Door Contact Push Button Switch is included. Mounting screws and other hardware are not listed in the supplied data.

Quick specs

Manufacturer
Sentek
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications