
1 / 17 · Click to enlarge
At a glance
Made by SEQURE, this product is a good fit for RC and FPV hobbyists. Main specs: model name SQESC 14130; processor STM32G071; input voltage DC 18V-59V(5-14S Lipo). Check that your power source supplies DC 18V-59V(5-14S Lipo) before connecting it.
Key Highlights
- Model Name: SQESC 14130
- Processor: STM32G071
- Input Voltage: DC 18V-59V(5-14S Lipo)
Ideal For
- Building or repairing a model
- Upgrading flight performance
- Spares for the field
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model Name | SQESC 14130 |
|---|---|
| Processor | STM32G071 |
| Input Voltage | DC 18V-59V(5-14S Lipo) |
| Continuous Current (Good Heat Dissipation) | 130A |
| Maximum current (Good Heat Dissipation) | 220A |
| Support Firmware | AM32,ESCape32,BLHeli_32 |
| Signal Protocol | Dshot(All), PWM, Oneshot, Multishot, etc. |
| RPM Signal Line | AM32(YES),ESCape32(YES),BLHeli_32(NO) |
| Programming Parameter Adjustment | Support |
| Throttle Calibration | Support |
| Timing Angle Setting | Support |
| Current Detection | Support |
| Telemetry Signal | Support |
| Motor Steering Settings | Support |
| RGB LED Color Lights | Support |
| BEC | NO |
| Product Size | 55*30*23mm(L*W*H) |
| Product Weight | 61.5g |
| Application Scenarios | Multi-axis UAV, fixed-wing drones, crop protection aircraft, helicopters, multi rotor drones, climbing cars, off-road model vehicles, model ships, surfboards, water sports products, etc |
Overview
The SEQURE SQESC 14130 Brushless ESC 5-14S Lipo Power Supply 130A AM32 / ESCape32 / BLHeli_32 Firmware Suitable for Multi-rotor Drones Airplane Models Crop Protection Aircraft Helicopters Model Ships RC Model Cars Surfboards, made by SEQURE, is listed in our range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model Name: SQESC 14130
- Processor: STM32G071 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Input Voltage: DC 18V-59V(5-14S Lipo) (match this to your power supply; too high a voltage can damage the part)
- Continuous Current (Good Heat Dissipation): 130A (your supply must deliver at least this much current)
- Maximum current (Good Heat Dissipation): 220A (your supply must deliver at least this much current)
- Support Firmware: AM32,ESCape32,BLHeli_32 (confirm your cable or board uses the same connector)
- Signal Protocol: Dshot(All), PWM, Oneshot, Multishot, etc.
- RPM Signal Line: AM32(YES),ESCape32(YES),BLHeli_32(NO)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Product Description:
(1) Adopting 32-bit high-performance processor STM32G071.Supporting AM32/ESCape32/BLHeli_32 firmware.It can program multiple motion modes of a motor, like unidirectional, bidirectional, and brake.
(2) Equips with high-power MOSFET, and combines with metal radiator, this esc dissipates heat effectively under high current load and works stably & continuously.
(3) Supports multiple protections such as low voltage protection, temperature protection, locked rotor protection, and current protection.
(4) The ESC automatically detects the throttle signal when it is powered on, supports all Dshot signals, and also supports signal protocols such as PWM, Oneshot and Multishot.
(5) Visual programming parameter adjustment tool supports motor timing, throttle calibration, current detection, motor steering, telemetry signal and other settings.
(6) Onboard RGB LED color light settings, multiple LED colors can be customized.
(7) Widely used in multi-axis UAV, fixed-wing drones, crop protection aircraft, helicopters, multi rotor drones, climbing cars, off-road model vehicles, model ships, surfboards, water sports products, etc.
Parameters of Product:
Package included:
14130(AM32)/14130(ESCape32)/ 14130(BLHeli_32),Optional
14130 ESC×1
300mm Twisted Pair Cable×2
30*90mm Transparent Heat Shrink Tubing×2
4*250mm Black Tie Straps×1
Overall Dimension
14130(AM32)/14130(ESCape32)/ 14130(BLHeli_32),Optional
(1)Product Size: 55*30*23mm
Net Weight Of Product: 61.5g
(2)Package Size: 150*100*35mm
Packing Weight: 80g
(3)Package Size (Including Outer Carton):155*105*50mm
Packing Weight (Including Outer Carton):130g

















Quick specs
- Model Name
- SQESC 14130
- Processor
- STM32G071
- Input Voltage
- DC 18V-59V(5-14S Lipo)
- Continuous Current (Good Heat Dissipation)
- 130A
- Maximum current (Good Heat Dissipation)
- 220A
- Support Firmware
- AM32,ESCape32,BLHeli_32









