Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SHARP, this ir and tof distance sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Distance Measuring Sensor; distance measuring range(m) 0.04 to 0.3; cable length 150.

Key Highlights

  • Model No. / Name: Distance Measuring Sensor
  • Distance Measuring Range(M): 0.04 to 0.3
  • Cable Length: 150

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameDistance Measuring Sensor
Distance Measuring Range(M)0.04 to 0.3
Cable Length150
Operating Temperature (°C)-10 to 60
UPC707223055984
Response Time (mS)38 ± 10ms
Length (mm)44
Width (mm)18.5
Weight (g)12
Distance Measure (cm)4 ~ 30
Output TypeAnalog (typically 0.4 to 2.3 V range)
Avg. Current Consumption30
Shipping Weight0.016 kg
Shipping Dimensions10 × 7 × 5 cm

Overview

The SHARP GP2Y0A41SK0F 4–30 cm IR Distance Sensor with Cable, made by SHARP, is listed in our ir and tof distance sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Distance Measuring Sensor
  • Distance Measuring Range(M): 0.04 to 0.3 (quoted range is usually line-of-sight; walls and interference shorten it)
  • Cable Length: 150 (measure your mounting space before ordering)
  • Operating Temperature (°C): -10 to 60
  • UPC: 707223055984
  • Response Time (mS): 38 ± 10ms
  • Length (mm): 44 (measure your mounting space before ordering)
  • Width (mm): 18.5 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Here we have the SHARP IR Distance Measuring Sensor Unit 4 ~ 30 cm With Cable-[GP2Y0A41SK0F]. This little unit uses a beam of infrared light to reflect off an object to measure its distance. Because it uses beam triangulation to calculate distance, it is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, easily read by an Arduino, PIC, Raspberry PI, or any other ADC chip. Please note: the wire colorings are not intuitive! Watch out before wiring! The datasheet has wiring details. Connect the two outer ground wires both to the ground, the two ‘VCC’ wires both to 5.5VDC power, and read the analog signal from the Vo wire. The analog voltage out will range from 5.5V when an object is about 4cm away and 4.5 V when the object is 30 cm away. The long-range makes them a good alternative to sonar sensors These cables have 3-pin JST connectors on one end and are available with pre-crimped male pins, pre-crimped female pins, and with unterminated wires on the other end. Note: This sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line If you want to Explore more Distance Sensors Click Here, Distance Sensor

Package Includes :

1 x Sharp GP2Y0A41SK0F Sensor. 1 x connecting cable.
Useful Links:
Arduino library for distance sensors

Quick specs

Model No. / Name
Distance Measuring Sensor
Distance Measuring Range(M)
0.04 to 0.3
Cable Length
150
Operating Temperature (°C)
-10 to 60
UPC
707223055984
Response Time (mS)
38 ± 10ms
See all specifications