Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This power supply module is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The Sinilink XY-SK180S DC Buck-Boost Programmable Power Supply Module Constant Voltage Current 40V 180W Intelligent Solar Charging MPPT with 1.8 Inch Color LCD Display is listed in our power supply module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specification:
Brand: Sinilink
Product Name: XY-SK180S DC Buck-Boost Programmable Power Supply Module
Input Voltage: 6.0 - 36.0V DC
Output Voltage: 0 - 40.0V DC
Output Current: 0 - 9.000A
Maximum Output Power: 180W
Control Modes: CV (constant voltage), CC (constant current), CW (constant power)
Voltage Resolution / Accuracy: 0.01V / ±0.5% + 1 digit
Current Resolution / Accuracy: 0.001A / ±0.5% + 3 digits
Typical Output Ripple: ≤150mV (Vpp)
Conversion Efficiency: About 88%
Data Storage: 10 groups of preset parameters
Display: 1.8" full‑view high‑brightness color LCD, 4‑way screen rotation, 8 color themes
Protections:
Reverse polarity (input)
Reverse current (output)
Hardware + software input overcurrent (13 A fixed)
Input under‑voltage (LVP: 5.5-36 V, default 36 V)
Over‑voltage OVP: 0-42 V, default 42 V
Over‑current OCP: 0-9.2 A, default 9.2 A
Over‑power OPP: 0-200 W, default 180 W
Over‑temperature OTP: 60-110 °C, default 110 °C
Over‑time OHP: 1 min - 999 h 59 min (off by default)
Over‑capacity OAH: 0-99999 Ah (off by default)
Over‑energy OWH: 0-99999 kWh (off by default)
External over‑temp ETP: 0-110 °C (off by default)
MPPT Function: Supports MPPT solar charging
External Sensor Interface: NTC 10 kΩ 3950B temperature probe port
Communication Interface: 4‑pin XH1.25 serial port, supports standard Modbus, PC software, networking modules, WiFi/APP control (optional modules)
Buzzer: Built‑in alarm / key prompt
Cooling: Intelligent temperature‑controlled fan with large‑area heat sink
Structure: Double‑layer PCB, plug‑in/output terminals, flame‑retardant plastic shell
Buttons & Knob: 5 silicone buttons (V‑SET, SW, I‑SET, ON/OFF, encoder) + rotary encoder
Product Size: 86 x 50 x 45mm (front panel 81.6 x 40.6mm)
Net Weight: 108g
Package Size / Weight: 104 x 70 x 52mm / about 128g

Features:
1. Wide buck‑boost range: 6-36 V input, 0-40 V / 0–9 A output, up to 180 W, suitable for lab supply, battery charging and DIY power projects.
2. Color LCD with flexible UI: 1.8" full‑view true‑color screen, 8 customizable color schemes, 360° rotation, multiple UIs (main, capacity record, V‑I curve, parameter setting).
3. Accurate control & storage: Fine 0.01 V / 0.001 A setting via buttons or encoder, 10 groups of memory for quick recall of commonly used voltage/current combinations.
4. Rich protection system: Complete set of protections (LVP/OVP/OCP/OPP/OTP/OHP/OAH/OWH/ETP) with buzzer alarm, hardware ICP 13 A, reverse polarity and reverse current protection.
5. Intelligent charging & MPPT: Supports CC/CV/CW modes, battery charging management, external NTC probe over‑temperature stop, and MPPT solar charging for higher utilization of panels.
6. Expandable communication & remote control: Serial Modbus support, works with optional WiFi, infrared and 433 MHz modules for PC software, mobile APP, cloud control, remote keypad input and firmware upgrade.

Package Includes:
1 x XY‑SK180S DC Buck‑Boost Power Supply Module



Product Safety Information