Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Sinilink, this power supply module is a good fit for makers, students and electronics hobbyists. Main specs: under-voltage(lvp) Adjustable 10-95V, default 10V; product name DC buck- power supply; input voltage 12.00~85.00V. Check that your power source supplies Adjustable 10-95V, default 10V before connecting it.

Key Highlights

  • Adjustable settings
  • under-voltage(LVP): Adjustable 10-95V, default 10V
  • Product name: DC buck- power supply
  • Input voltage: 12.00~85.00V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

under-voltage(LVP)Adjustable 10-95V, default 10V
Product nameDC buck- power supply
Input voltage12.00~85.00V
Output current0-25.00A
Power output1750W
Resolution of voltage0.01V
Storage data group10 groups
Screen sizeOver 1.8-inch LCD with a viewable area of 38*29mm
Output ripple typical valuevpp-150mv
MPPT functionSupport MPPT solar charging
Efficiency of conversionAbout 95%
Bare board size Screen instrument111*72*45mm 86*45*50mm
Bare board package Product Package142*107*46mm 172*95*60mm
over-voltage(OVP)Adjustable from 0 to 72V, default is 72V
over-current(OCP)Adjustable from 0 to 27A, default 27A
over-power(OPP)Adjustable from 0 to 2000W, default is 1800W
over-temp(OTP)Adjustable from 0 tollO ℃, default is 95 ℃
over-time out(OHP)1 minute - 99 hours 59 minutes, off by default
over-capacity(OAH)Adjustable from 0 to 9999Ah, disabled by default
over-energy(OPH)Adjustable from 0 to 4200KWh, off by default

Overview

The Sinilink XY7025 DC Buck Adjustable Power Supply Module 70V 25A 1750W Constant Voltage Current LCD Display Solar Charging Module, made by Sinilink, is listed in our power supply module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • under-voltage(LVP): Adjustable 10-95V, default 10V (match this to your power supply; too high a voltage can damage the part)
  • Product name: DC buck- power supply
  • Input voltage: 12.00~85.00V (match this to your power supply; too high a voltage can damage the part)
  • Output current: 0-25.00A (your supply must deliver at least this much current)
  • Power output: 1750W
  • Resolution of voltage: 0.01V (match this to your power supply; too high a voltage can damage the part)
  • Storage data group: 10 groups (space for firmware, files or media)
  • Screen size: Over 1.8-inch LCD with a viewable area of 38*29mm (measured diagonally; compare with the space you have before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


 


 

Precautions:


1. The input cannot be connected to AC power, nor can it be connected to 220V mains power.

2. The maximum input voltage must not exceed 90V. It is recommended to use within 85V, and the positive and negative terminals must not be connected reversely.

3. The output has no reverse current protection. When connecting the battery, ensure that the power supply's output voltage is always higher than the battery voltage. Alternatively, a diode can be connected in series with the positive output terminal to allow one-way conduction, preventing reverse current from the battery voltage from damagingthe power supply.

4. When connecting the battery to the output terminal, pay attention not to connect the positive and negative terminals reversely.

5. This product is a DC buck power supply. The maximum output voltage = input voltage * 0.945.

Features:

1.Advanced Voltage and Current Control:

Offers precise control with a voltage accuracy of ±0.5%+1 word and current accuracy of ±0.5%+3 words. Ideal for applications requiring high levels of accuracy and reliability, this power supply ensures that your devices receive the exact voltage and current specifications needed.


2.Highly Efficient Power Conversion:

With an efficiency of about 95%, the XY7025 effectively minimizes energy loss and heat generation, making it perfect for extended use. This efficiency translates into cost savings and better overall performance in energy-demanding environments.


3.Comprehensive Protection Mechanisms:

Equipped with adjustable protection features for under-voltage, over-voltage, over-current, over-power, over-temperature, over-capacity, and over-energy, this power supply safeguards your devices against potential damage due to unforeseen electrical issues.


4.Versatile Input and Output Range:

Supports an input voltage range of 12V to 85V and an output voltage range of 0V to 70V, along with a current output of up to 25A. This wide range of voltage and current settings makes the XY7025 suitable for a variety of applications, from laboratory testing to industrial use.


5.User-Friendly Interface:

Features an over 1.8-inch LCD screen with a clear 38*29mm viewable area, providing easy monitoring of voltage, current, and power settings. The interface is designed for intuitive use, allowing for quick adjustments and precise control without the complexity.

 

Package Included:

Package #1:

1 x Sinilink XY7025 DC Buck Power Supply Module(Only Board)

or

Package #2:

1 x Sinilink XY7025 DC Buck Power Supply +LCD Module (Full Kit)



Product Safety Information

Quick specs

under-voltage(LVP)
Adjustable 10-95V, default 10V
Product name
DC buck- power supply
Input voltage
12.00~85.00V
Output current
0-25.00A
Power output
1750W
Resolution of voltage
0.01V
See all specifications

More from Sinilink

View all →

Related Products

View all →