
1 / 3 · Click to enlarge
At a glance
Made by Sipeed, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Sipeed Maix; processor type 64-bit open architecture; cpu Powerful dual-core 64-bit open architecture-based processor with rich community resources. Check that your power source supplies 4.8V ~ 5.2V, external power supply before connecting it.
Key Highlights
- Item Type: Sipeed Maix
- Processor Type: 64-bit open architecture
- CPU: Powerful dual-core 64-bit open architecture-based processor with rich community resources
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sipeed Maix |
|---|---|
| Processor Type | 64-bit open architecture |
| CPU | Powerful dual-core 64-bit open architecture-based processor with rich community resources |
| Debugging Support | High-speed UART and JTAG interface for debugging |
| Supply Current | & 600mA, external power supply |
| Supply Voltage | 4.8V ~ 5.2V, external power supply |
| GPIO interface | All GPIOs connected to header 2*20 2.54mm |
| One-click Download circuit | Just connect the USB type C cable to complete the download Onboard CH340, which support 2Mbps baud rate |
| DVP Camera connector | 24P 0.5mm FPC connector |
| LCD connector | 8bit MCU LCD 24P 0.5mm FPC connector |
| Buttons | RST button and USR button |
| Micro SD card (TF card) slot | Support Self-elastic card holder |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 12 × 8 × 3 cm |
Overview
The Sipeed MAix BiT for RISC-V AI+IoT, made by Sipeed, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sipeed Maix
- Processor Type: 64-bit open architecture (look up this chip to confirm it runs the firmware or libraries you plan to use)
- CPU: Powerful dual-core 64-bit open architecture-based processor with rich community resources (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Debugging Support: High-speed UART and JTAG interface for debugging (confirm your cable or board uses the same connector)
- Supply Current: & 600mA, external power supply (your supply must deliver at least this much current)
- Supply Voltage: 4.8V ~ 5.2V, external power supply (match this to your power supply; too high a voltage can damage the part)
- GPIO interface: All GPIOs connected to header 2*20 2.54mm (confirm your cable or board uses the same connector)
- One-click Download circuit: Just connect the USB type C cable to complete the download Onboard CH340, which support 2Mbps baud rate (confirm your cable or board uses the same connector)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
AI is pervasive today, from consumer to enterprise applications. With the explosive growth of connected devices, combined with a demand for privacy/confidentiality, low latency and bandwidth constraints, AI models trained in the cloud increasingly need to be run at the edge.
MAIX is Sipeed’s purpose-built module designed to run AI at the edge, we called it AIoT. It delivers high performance in a small physical and power footprint, enabling the deployment of high-accuracy AI at the edge, and the competitive price make it possible embed to any IoT devices. As you see, Sipeed MAIX is quite like Google edge TPU, but it act as master controller, not an accelerator like edge TPU, so it is more low cost and low power than AP+edge TPU solution.
Sipeed MAix BiT development board
MAix's CPU
In hardware, MAIX have powerful KPU K210 inside, it offers many exciting features:
- 1st competitive RISC-V chip, also 1st competitive AI chip, newly released in Sep. 2018
- 28nm process, dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency (able to 800MHz)
- KPU (Neural Network Processor) inside, 64 KPU which is 576bit width, supports convolution kernels, any form of the activation function. It offers [email protected],400MHz, when overclock to 800MHz, it offers 0.5TOPS. It means you can do object recognition 60fps@VGA
- APU (Audio Processor) inside, support 8mics, up to 192KHz sample rate, hardcore FFT unit inside, easy to make a Mic Array (MAIX offer it too)
- Flexible FPIOA (Field Programmable IO Array), you can map 255 functions to all 48 GPIOs on the chip
- DVP camera and MCU LCD interface, you can connect a DVP camera, run your algorithm, and display on LCD
- Many other accelerators and peripherals: AES Accelerator, SHA256 Accelerator, FFT Accelerator (not APU's one), OTP, UART, WDT, IIC, SPI, I2S, TIMER, RTC, PWM, etc.
Features:
- It is twice of M1 size, 1x2 inch size, breadboard-friendly, and also SMT-able
- It integrates USB2UART chip, auto-download circuit, RGB LED, DVP Camera FPC connector(support small FPC camera and standard M12 camera), MCU LCD FPC connector(support our 2.4 inch QVGA LCD), TF card slot.
- MAix BiT is able to adjust core voltage! you can adjust from 0.8V~1.2V, overclock to 800MHz!
Package Includes:
1 x Sipeed MAix BiT for RISC-V AI+IoT
Note: The Camera snown in the image doesn't come with the product.Quick specs
- Item Type
- Sipeed Maix
- Processor Type
- 64-bit open architecture
- CPU
- Powerful dual-core 64-bit open architecture-based processor with rich community resources
- Debugging Support
- High-speed UART and JTAG interface for debugging
- Supply Current
- & 600mA, external power supply
- Supply Voltage
- 4.8V ~ 5.2V, external power supply



















